Jump to content
Security Installer Community

james.wilson

Admin
  • Posts

    30,549
  • Joined

  • Last visited

  • Days Won

    279

Everything posted by james.wilson

  1. lol no its still on the right li ion battery. Ive only changed the wheels honest... Its doing about 900m2 very well. Its 2 years in too. Im expecting a new drive motor pack this year I should get the proper one i never expected it to manage the area or terrain. Ill do a video of it in the worst bits of the back garden. It also does the front but ive modified that slightly too
  2. Robomow RC300 Needs the much bigger MC but ive changed it a little
  3. you mean ascent? I know im a brummie but its not accept
  4. Not tried one. The constant is a voltek pir with a pulse count module on it. However they dont like the animal activity so i started with other things. HKC quad so far (on low sens) has the best catch vs FA) The optex is very poor as it hates the sun (i know its outside but its a dt on its lowest settings) the honeywell dt is pretty stable but still worse fa due to deer so im still testing etc
  5. Yep i added a few after my hkc test to see how others did. The optex DT is coming down the honeywell dt is moving from the front to back to check its not environmental as the sun rises that side. Ive decided the optex dt doesnt like sunlight
  6. id want to get to the bottom of the low comms thats normally pretty serious either cable or panel but then if you use line 3 it will prove either
  7. id test the keyprox on short lead on line 3 maybe see if it adds key 30 and max 30
  8. no what does menu 61 keypads say about address's responding? ie 10, 20, 51 etc
  9. temp power connection i need to run the ring to it and put a switched fcu on it but at least its earthed... I will replace the left hose that goes up the garden with mdpe when i dig it in. ALso now have the nr valve on the incoming and will keep it on a hose so i can disconnect and drain in the cold
  10. better than escalating the issue i suppose
  11. Address 0 line 2 should be ok for the keyprox, how are you 'adding' the module? where did you get the keyprox from also? which one is it?
  12. No you need a polled solution for dualpath with backup etc However it may do it on the app as the vanderbilt, hkc etc push alarms through to the arc from the app platform not sure on the honeywell have never used it that way. ie the size yes it will do re size but maybe not for flexability. What your doing most 'medium' sized business wouldnt be doing
  13. It is im still using soldered copper throughout I dont mind using the pipe only for watering plants wouldnt trust it over copper. But i suppose its the same as some customers if its cheaper (and speedfit certainly is) is 15mm so must be the same etc etc
  14. An accenta is a basic panel and looking at your diagram will do what you want. If im forgetting the home assistant link then id go for a hkc as pro, galaxy if non pro, texecom prem if you want to lean on manufacturer tech support
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.