Following on from another thread.
I use ifttt and my hkc 10270 with my drayton wiser heating system
As it change the mode to away when fully armed i use a modified tr2 as my boiler is too old to support opentherm
As the tr2 measures the (single room its located in) temp the boiler still modulates its power output rather than just on and off
The wiser system then calls for heat by changing the boiler mode to 'comfort' from frost
Plus im on LPG so any savings are magnified due to the fuel cost. Some rooms have more than 1 radiator. I prefer the accuracy of the room stats and will be getting at lease 1 more of these
Yes set at 5 degrees
I live out in the middle of nowhere, badgers little deer pheasants etc never had success with it but I haven't tested the gear Pete uses
But sunlight, rain etc are issues beams are immune too. Also fog etc.
Plus my alarm etc is battery backed my cctv isnt
I only use beams and detectors both wired and wireless for notification and external lighting only. Heating is by alarm set status not yet on a per room basis but i might do this.
you wont be able to link them in that way. I do what your trying to do with beams and external sensors at home. It also controls my heating modes (ie away etc) based on set status also using ifttt. I get app notifications when armed and chime when disarmed But i dont use pyronix anything. Its HKC which is a pro installer only panel. You could get similar with more available kit, ie the spc or dimension but it wont be a simple programming job
Pixel count is one aspect of many things that make up final image quality. Chipset and lens quality is more important ie 8mp digital cameras to not provide the same quality image if so why does anyone buy slr etc
you will need to enter your code after powering it back up. Or press reset im unsure. But if you have faults it wont let you reset it till the faults are cleared, ie dont exist anymore