Jump to content
Security Installer Community

james.wilson

Admin
 View Profile  See their activity

  • Posts

    30,549

  • Joined

  • Last visited

  • Days Won

    279

 Content Type 

Everything posted by james.wilson

  1. james.wilson
    Totally disagree with that statement Yes it's possible if using insecure ways/equipment/setup etc Best disable your smartphone/pc etc too
  2. james.wilson
    Yes I have asked for it to be sorted. Let me know if there is any issue
  3. james.wilson
    alternatively fit an external wired contact to the frame/window and wire that into your transmitter
  4. james.wilson
    Logan please stop begging all the time. You don't want for sale and it is getting tiresome. If any of us have stuff to send we will as many of us have
  5. james.wilson
    Yes or use a flush cabled one and wire it into the shock etc
  6. james.wilson
    As above you need to request it then I'll sort it. I need to know your SW account
  7. james.wilson
    Yes trade ones
  8. james.wilson
    It is 1 way rf, its noticed the wired part is missing not the wireless bit but yes you are right
  9. james.wilson
    The better hadn't be!
  10. james.wilson
    OK, you will need to remove the rf device. Obviously you can't just disconnect bits of am alarm and it not mind!
  11. james.wilson
    Shouldn't use more batts than every 2 years but you will need to remove all programming for the wireless side if you have removed it. I'm assuming this isn't under any sort if support contract
  12. james.wilson
    yes im getting ready for the redundancy, we do loss covering when its likely to come back, going into December im gonna have convert my garden and brick a few windows up, this is an old policy right...
  13. james.wilson
    no there is Honeywell, Visonic, Scantronic, EL, Vanderbilt, UTC to name a few. there is also the restricted stuff like hkc
  14. james.wilson
    kits are generic and usually put together. Few pro installers would use a kit they should pick the right detectors etc for the application. Now your seeing why kits are far from ideal as there has to be a compromise somewhere also pstn is being switched off by 2025 so best not install something that can only use it
  15. james.wilson
    Ive split this out
  16. james.wilson
    plastic is a very good shock absorber so range is low. Again cant tell without site survey etc but play safe with 1 detector per section
  17. james.wilson
    Depending on window contruction, type etc you may need 3 sensors
  18. james.wilson
    Ed I would advise you break your questions down into smaller chunks, focus on one thing per topic etc
  19. james.wilson
    Glad your all sorted
  20. james.wilson
    Must admit ive never known an insurer accept a non certificated system for anything. Hope its the actual insurer and in writing not the broker or call
  21. james.wilson
    few do. few care etc
  22. james.wilson
    im not a fan of the enforcer (panel on entry route etc)
  23. james.wilson
    yes
  24. james.wilson
    no its not a resistor its a jumper
  25. james.wilson
    thats a ventcroft vision sab its the green nicd pack on the left there is an orange iirc jumper that disconnects it
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.

  I accept