Jump to content
Security Installer Community

james.wilson

Admin
 View Profile  See their activity

  • Posts

    30,578

  • Joined

  • Last visited

  • Days Won

    281

 Content Type 

Everything posted by james.wilson

  1. james.wilson
    Hi there
  2. james.wilson
    I think so yes
  3. james.wilson
    I use hkc rf ones that are interlinked
  4. james.wilson
    Evening
  5. james.wilson
    I said this years ago the only bit of kit that knows if your in, out or in bed is the alarm. Should be the hub for everything.
  6. james.wilson
    6 are the circuit feeds 0v if so could you bridge from 0v at the detector and use the 2 cores as separate circuits?
  7. james.wilson
    My favorite quote 'I hope it doesn't fall down'
  8. james.wilson
    On the upside that's what's expected from us. Gonna save a fortune I need to make everyone redundant...
  9. james.wilson
    Be hard to find a buried cable when you dont have a clue. A tone tracker might help to find areas to dig out but unlikely.
  10. james.wilson
    Bypass... Link out Need to drill down as to what is the issue one step at A time Get to a known point then add things till it fails
  11. james.wilson
    Bypass them at the controller and soak test then the same at the sensor it may be the controller has failed
  12. james.wilson
    Thanks for the follow up, but i have never used the decvice in question. So couldnt add anything. Id be cautious of that info as rtsp urls are usually different from each manufacturer unless you can edit them in some way.
  13. james.wilson
    Agreed
  14. james.wilson
    Any sensor with pir in it is going to have issues around 35+ ambient
  15. james.wilson
    Is a maglock secure enough for your steel door?
  16. james.wilson
    You could yes or there is usually a spacer in the fixing kit
  17. james.wilson
    I'm not sure dt will I'd expect the pir side to have the same issue. You might be better with perimeter detection
  18. james.wilson
    Is the client or you not fussed about theft of device in that location?
  19. james.wilson
    What's the issue detection in a hot area or false alarms. I would always go for perimeter in a conservatory etc
  20. james.wilson
    Wireless dt i only know of hkc. It wakes the mw part up when needed I'd assume texe have one tho?
  21. james.wilson
    Use a nas drive then or a green one to reduce the noise Imo only hi speed drives are loud and you won't need it for 4 cams
  22. james.wilson
    I wouldn't use an ssd. You could change the fans for larger units but most need some air movement
  23. james.wilson
    I should see if I have an msx card for that 44 of yours I'll have a look later today
  24. james.wilson
    There is gear we rate some is poor some is great. I doubt any of us thats worked with it has pyronix in high regard. Castle yes pyronix no. I'm hoping hik will make castle great again but it's not about that so probably no.
  25. james.wilson

    Wanna

    james.wilson replied to Wanna's topic in Guest Forum

    Lol
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.

  I accept