Jump to content
Security Installer Community

james.wilson

Admin
 View Profile  See their activity

  • Posts

    30,702

  • Joined

  • Last visited

  • Days Won

    290

 Content Type 

Everything posted by james.wilson

  1. james.wilson
    Yes or use a flush cabled one and wire it into the shock etc
  2. james.wilson
    As above you need to request it then I'll sort it. I need to know your SW account
  3. james.wilson
    Yes trade ones
  4. james.wilson
    It is 1 way rf, its noticed the wired part is missing not the wireless bit but yes you are right
  5. james.wilson
    The better hadn't be!
  6. james.wilson
    OK, you will need to remove the rf device. Obviously you can't just disconnect bits of am alarm and it not mind!
  7. james.wilson
    Shouldn't use more batts than every 2 years but you will need to remove all programming for the wireless side if you have removed it. I'm assuming this isn't under any sort if support contract
  8. james.wilson
    yes im getting ready for the redundancy, we do loss covering when its likely to come back, going into December im gonna have convert my garden and brick a few windows up, this is an old policy right...
  9. james.wilson
    no there is Honeywell, Visonic, Scantronic, EL, Vanderbilt, UTC to name a few. there is also the restricted stuff like hkc
  10. james.wilson
    kits are generic and usually put together. Few pro installers would use a kit they should pick the right detectors etc for the application. Now your seeing why kits are far from ideal as there has to be a compromise somewhere also pstn is being switched off by 2025 so best not install something that can only use it
  11. james.wilson
    Ive split this out
  12. james.wilson
    plastic is a very good shock absorber so range is low. Again cant tell without site survey etc but play safe with 1 detector per section
  13. james.wilson
    Depending on window contruction, type etc you may need 3 sensors
  14. james.wilson
    Ed I would advise you break your questions down into smaller chunks, focus on one thing per topic etc
  15. james.wilson
    Glad your all sorted
  16. james.wilson
    Must admit ive never known an insurer accept a non certificated system for anything. Hope its the actual insurer and in writing not the broker or call
  17. james.wilson
    few do. few care etc
  18. james.wilson
    im not a fan of the enforcer (panel on entry route etc)
  19. james.wilson
    yes
  20. james.wilson
    no its not a resistor its a jumper
  21. james.wilson
    thats a ventcroft vision sab its the green nicd pack on the left there is an orange iirc jumper that disconnects it
  22. james.wilson
    the sd1 is a dialler, its not your alarm panel. What panel have you got?
  23. james.wilson
    Is this something your running on HA?
  24. james.wilson
    as above the more modern risco panels (Gardtec no longer exist) have apps but the equipment you have is more 6210 than iPhone 6
  25. james.wilson
    you might have the only fully functioning 20yr old lead acid battery but i doubt it. should be changed at 5 yr max Intruder alarms shouldnt sound when the power goes off
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.

  I accept