Jump to content
Security Installer Community

james.wilson

Admin
 View Profile  See their activity

  • Posts

    30,578

  • Joined

  • Last visited

  • Days Won

    281

 Content Type 

Everything posted by james.wilson

  1. james.wilson
    Whats the thoughts on how this may affect cctv ie if defence case uses same footage and changes the face to the defence KC etc I notice a lot of diy type cameras only ave footage in mp4 format not in a native secure format. 'I was deepfaked by my best friend' - BBC News
  2. james.wilson
    You have just connected your fan to a relay I can't see that working if its a relay. Use your multimeter to see if the relay changes state or wire the power to the fan through the relay
  3. james.wilson
    if its not coomunicating then it wont go off again, however the siren may self actuate with a panel instruction if its tamper switch keeps operating
  4. james.wilson
    supervision failure is bad. Usually because batts havnt been chnaged or inferior cheap ones used. Is jamming detect trurned on (should be)
  5. james.wilson
    you will need to fix the tamper issue on the bell. Id assume its not closing correctly or not securly fitted to the wall
  6. james.wilson
    if disconnected and jumper in both settings id say you may have blown it up
  7. james.wilson
    if you disconnect the stobe input on the sab does it stop?
  8. james.wilson
    supervision failure means the panel had heard from the sensor for a period of time. This would mean if it needed to transmit an alarm it wouldnt get through and it wouldnt work. You dont want to disable this you want to fix the problem. There will be more info on the siren fault you will need to know this to help diagnose
  9. james.wilson
    id move the LF jumper
  10. james.wilson
    Every pro will recommend and specialise. My personal pref is for hkc buy is fat from a diy suitable product I doubt you would get support for it
  11. james.wilson
    Looks like there are 2 tamper terminals. I'd assume a link from 0v to the other tamper connection? Yes can you invert the strobe in the panel or sounder?
  12. james.wilson
    different installers will specialise and prefer different gear. my pref for example would be hkc. 6wb will be texecom as another example. there are some id avoid but wont say here
  13. james.wilson
    Bear in mind thats a diy product not a pro product. For instance most of us here arent allowed to use it
  14. james.wilson
    or not very good
  15. james.wilson
    you find new keypads that work with that panel and old keypads wont work with a new panel. ie would you use a new ford ranger ECU on your citroen AX
  16. james.wilson
    2) sounds like your strobe is configured the worng way. It will need inverting in the panel if the panel is wrong or the bell etc 1) you are right to me means you have a tamper problem on the bell
  17. james.wilson
    as above dest for diy is a lot different to best.
  18. james.wilson
    OK that would be harder though as its the switches on the bell and there would be voltage on them. Is the tamper return from the bell at 0v?
  19. james.wilson
    i assume all tampers are closed on the bell?
  20. james.wilson
    as al says you will need to setup the partsets in programming. they are dsiabled by default
  21. james.wilson
    agreed
  22. james.wilson
    first off be really careful with your stray cores. There should be nothing sticking out of the terminals like in the images. It will blow something. Id assume that bla is bell input and blf is strobe
  23. james.wilson
    Great. I'd assume. It is OK then Seems bizarre that you have a tamper fault but all switches and loops are closed
  24. james.wilson
    OK you know more than me
  25. james.wilson
    id keep the galaxy to be honest
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.

  I accept