Jump to content
Security Installer Community

james.wilson

Admin
 View Profile  See their activity

  • Posts

    30,639

  • Joined

  • Last visited

  • Days Won

    287

 Content Type 

Everything posted by james.wilson

  1. james.wilson
    Welcome
  2. james.wilson
    Thanks I was curious as I assumed wireless. Wonder how this will go with newer systems supported by a maint contract?
  3. james.wilson
    The leds not flashing says to me Sab tamper not closed
  4. james.wilson
    What will you replace it with?
  5. james.wilson
    I'd say your issue isn't Paxton related then. Is your relay stable from the alarm I'm assuming it isnt
  6. james.wilson
    I belive if you complain to the council they change something. I'd love to know what they do.
  7. james.wilson
    Don't know the panel you may be able to program them as double pole
  8. james.wilson
    Did you link out with cable or the relevant resistor?
  9. james.wilson
    im wondering if you have a bad connection on the plug/pcb/relay on the connection link it at the Paxton to see if the messages stop and work back from there to identify where its coming from
  10. james.wilson
    It looks like it's continually arming etc. What's the relay state and what if you link the input
  11. james.wilson
    Don't say that I'm an rbs shareholder
  12. james.wilson
    No ive finally replaced my 950xl im looking at apps I have wanted to use magicplan for a while but didnt have a device. got me wondering what apps the rest of us are using?
  13. james.wilson
    I would agree that few do provide one
  14. james.wilson
    Welcome
  15. james.wilson
    Yes agreed its a shame but on the upside dB storage demand is lower
  16. james.wilson
    I assume your using the stock integration ie clean inputs and outputs between the 2?
  17. james.wilson
    Welcome back
  18. james.wilson
    It's more for signalling. Audible only has always had limitations
  19. james.wilson
    Why not just have a proper camera and a door bell, use an alarm input if you like. I'm amased that anyone needs this doorbell crap much less wants one. Put a camera at the proper height and don't fall for the marketing
  20. james.wilson
    i would remove the programming of the circuits that were on the rf rio and then disable the rio. A 51-17 may help though
  21. james.wilson
    You could use smart switches and home assistant
  22. james.wilson
    that's a hard one to achieve and meet component standard. Once an input hits the panel it has to do things as prescribed not make a decision
  23. james.wilson
    you would need a developer / coder to write the firmware. Also most people would want the approval to be 3rd party certificated. |This costs a lot. the unapproved market probably wouldn't need this but you would need to meet the component standards of EN
  24. james.wilson
    resistors are recommended at each end of the daisy chain
  25. james.wilson
    no its run by the confirm timer. also a pulse of 15 mins wouldn't silence if uunset before 15 mins
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.

  I accept