Jump to content
Security Installer Community

james.wilson

Admin
  • Posts

    30,545
  • Joined

  • Last visited

  • Days Won

    278

Everything posted by james.wilson

  1. a sab module from those days and a joint on the strobe?
  2. grade 3 i like Optex and Honeywell detectors. Elmdene or Knight contacts
  3. that type need to be vertical. Id assume that d is top keeping the sensor horizontal
  4. I'd advise you do, you do know the liability your taking on just by working on fire generally?
  5. be 4 mp but ty if you find one that I can use for testing on a 5mp camera please send me a link?
  6. Ideally you want one, if you can keep it going?
  7. if it needs programming you need to be in that mode
  8. as norman says cct 8 isn't programmed as you want.
  9. just the same then, yes you can. you also dont need to use circuits on the panel
  10. it activates the panel as the circuit its connected too will be programmed as keyswitch
  11. Looks like this Does ahd, cvi, tvi, onvif and hdsdi tone tracker and cat 5 tester but on the coax side only upto 2mp
  12. you could always upgrade this important system. if its important?
  13. That wont work, your reader is acting as a key switch. your panel is too old to support native prox
  14. as you cant spell either Pete, you giving up or just after the blue badge?
  15. I dont know what you mean, but the last time i did this i connected the Hold off - to the tamp return of the first box
  16. I would start a new thread. It sounds like you are talking about a galaxy mk7 keypad.
  17. as above are you hoping that entering 1966 will disable it. If so would this not be used by burglars? you can't disable it like that as its not a diy bit of kit.
  18. I would say the external fail safe timer has stopped it for now
  19. can you give us a picture of the sab module?
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.