Hi all
Got a Gardtec panel that has 2 panic alarm wireless fobs as zones 92 and 93
When customer started setting procedure - alarm wouldn't set and got a alert message on one of the panic fobs - wouldn't reset with engineers code and kept into 'alert! Enter code' or something to that effect. It leads me to think the panel thinks the fob is being pressed due to a fault and won't set as a result - all the alarm reset codes are either 'any code' or 'engineers code' so I don't think there's a different code that I don't know for PA reset. Wondered if any one has had similar issues? Or have any info
Regards
Hi all
Got a Gardtec panel that has 2 panic alarm wireless fobs as zones 92 and 93
When customer started setting procedure - alarm wouldn't set and got a alert message on one of the panic fobs - wouldn't reset with engineers code and kept into 'alert! Enter code' or something to that effect. It leads me to think the panel thinks the fob is being pressed due to a fault and won't set as a result - all the alarm reset codes are either 'any code' or 'engineers code' so I don't think there's a different code that I don't know for PA reset. Wondered if any one has had similar issues? Or have any info
Regards
Sorry yes first dt is set to entry (exit is the one to be used with a push button?)
Yeah, think 30 secs for the timer on setting - kp is in the entrance lobby and the dt is in the lobby set to ENTRY.
I refer to regs only to follow the changes-- the big ones recently being fire resistant fixings for all surface mtd cabling in or out of non metal containment in commercial installs, afdds which I still don't fully get.
There's some car charger stuff. Would you use lsf b/a cable on a commercial install even if not specced?
Hi all,
Have a galaxy install where no door contacts have been specced - so unable to start setting/unsetting from a zone - set the dt pir at the front door lobby to EXIT and was wondering how best to set up the system for the customer - with timers for setting/unsetting?
Regards
Never used low smoke b/a cable. We would go low smoke for all other cables in commercial installs t+e, flexes etc.. . I suppose bs7671 covers elv systems or does it? Those regs can be very vague.
Like the look of those fire clips where you just drill a hole and hit em In.
They also specced a gsm/gprs comms module - we are setting up radio/radio Dualcom for keyholder monitoring, I take it there's no need for the honeywell module as well?
Hi, dont have the RSS. Can't justify the cost as we don't do a lot of galaxy.
One question, got an ip module that's been specced - would that just connect to customers network to be able to use the app?
Regards
Panel - gprs comms module- ip comms module - 15 dt pirs... I'm thinking I'm gonna set it up and program in the office before I hand it to my installer.
Hi, would like to start a topic specifically for interflex installers to share info on - best/worst experiences, rough installs, hints and tips etc...
Look forward to hearing from you...
Regards
Hi, would like to start a topic specifically for Paxton installers to share info on - best/worst experiences, rough installs, hints and tips etc...
Look forward to hearing from you...
Regards
I see - good one - just wondered if such a tool existed - personally, bit of cable tray or mt2 - im not John Wayne, however, I make girls walk like him ?
Hi all, is there a staple gun that will fix into masonry? Electric or not- from what I've seen even the battery staple guns can't do it... Any one have any recommendations?
Regards