ADAM90

its not that the external bell isnt going of just the internal control panel ? I mean i could disconnect it but is it the bell thats the issue? doesnt come up bell tamper, i think i have to disconnect 2 x wires? THE ORANGE AND GREEN ONES?

hi how do i wire it as a G2 ? Do i need to go up the ladders again? or can it be done at the control panel?

HI Is there anyway i can stop this AUX 0 Issue? Its just went off again a few days after checking everything? Is there a way to stop this from happening again from the main control panel If there is please explain im away on holiday tomorrow and now will just have to unplug the full alarm system now

Thank you, I just noticed that but takes 1-2 mins to activate

Hi So when i enter my house through the front door and don't put in the user code I am just getting a INTERNAL PANEL ALARM My outside Siren, and 2 indoor ones do not go into full alarm Yet my system is fully set Ive done a walk test and all ricochet are all 100% with no issues! i want the entry to come on says 10 secs but as soon as i hit the PIR Goes into full alarm mode Do you know what the settings are in Wintex or keypad to make it do that? Thanks

My premier elite 64 wireless system and keypad doesn't set via the wireless keypad I Put in the 4 digit user code but when i press tick to set it doesnt do anything But it sets okay on Wintex and Smartcom App Also, it UNARMS OK on the wireless keypad but just refuses to set! Does anyone know why the wireless keypad doesnt ARM ? But unarms OK? Also arms ok on wintex and smartcom app ? Thanks

ON keypad said BELL FAULT When opened, so the AUX message thats disappeared for now couldn't of been the issue with the bell tamper Tapped hard on the internal siren didnt do anything seems okay again for now

The BELL Tamper came on when i was testing it all Since went off so im guessing its the internal siren? It did say AUX Before but for now hasnt reappeared? Im going on holiday and need it 100%

THANKS FOR ALL THE REPLIES how do i do this: You haven't terminated the test terminal at the panel from what I see, so it's not doing the G3 periodic testing which I expected to be part of the issue. Im thinking its that internal siren thats bad! im not sure how to wire that "internal speaker up separately? i tidied up the external and seems okay looking also tidy neatened up the wires all 8 x cores being used, seems ok i can also hear the micro switch clicking etc When i let go of the tamper the external siren sounds! Im looking hopefully at it being at the "control panel side? or that small cheaply made internal speaker!

this one has a cheap tamper inside it small and flimsy

a close up! Im just thinking guys maybe its the small INTERNAL STROBE/SIREN IVE ALSO Wired up to the same terminals as the exterior bell box?

Does anyone know the settings for it? in the setting up? the way its wired? Im releasing the small plastic cover tamper screw so should press against the switch better and tidying up the wires as i put a nought in the outer sheath!

Thanks for the replys but is there anyway i can prevent this? Whats the best thing to do i working on it now? IS the AUX Fault for the bell box for sure? Is it a bad tamper switch? or my wiring wrong?

Hi Guys I've done a self install but suddenly out of nowhere got an internal alarm going off The completed alarm has only been fully set up for 2-3 days Ive a sneaky feeling its the external alarm box tamper thats maybe dodgy? It says Auxiliary Tamper, I checked all my Ricochet Mesh Technology Items, Keypad, PIR ETC No issues came up can anyone tell me if my wiring looks OK please?