Search the Community
Showing results for tags 'Enforcer'.
Found 12 results
-
Hi all, Could I please get some wiring guidance on connecting a Honeywell AG6 external siren to a new Pyronix Enforcer panel (v10). I’ve made some assumptions on the siren terminals (left side) and just need to fill in the blank on the right for the Tamper Return: ST- = STRB R- = ??? SW- = BELL V+ = +12v V- = COM Many thanks! Rob
-
Hi guys, I was wondering if someone could help me, I have a Pyronix Enforcer V10, and I would like to connect TWO internal Pyronix Sounders to the system but I am unsure how to connect to the internal IO board, or if to connect any resistors? I do not currecly have any other item connected to the IO board. I've attached a couple of pictures of the twin alert connections aswell as the IO board in the Enforcer. Thanks for your help
-
Hi guys, I was wondering if someone could help me, I have a Pyronix Enforcer V10, and I would like to connect TWO internal Pyronix Sounders to the system but I am unsure how to connect to the internal IO board, or if to connect any resistors? I do not currecly have any other item connected to the IO board. I've attached a couple of pictures of the twin alert connections aswell as the IO board in the Enforcer. Thanks for your help
-
I am not a professional installer. I purchased enforcer-32-we with digi-gsm module 2 years before and installed at my home. It is working fine. The GSM module send alarm notifications by SMS. But I contacted the pyronix support and they told that the UK version does not support SMS remote control. Are there any cheapest options to include this feature to my system. If so please let me know the options clearly. I prefer GSM as it is more reliable as intruder can cut my telephone line before intrude. If this is not possible, I am ok with other options.
-
What the difference between the following: EURO 064 - LCD Keypad with proximity reader, 2 inputs and 1 output EURO 068 - LCD Keypad with proximity reader EURO 069 - LCD Keypad Which one should I use with my Pyronix Enforcer wireless alarm system. i plan to wire the keypad to the control panel.
-
Hello Everyone, I bought ENF32GB-WE one year ago. I would know if this version will allow me to arm/disarm my system remotely by sending sms ? Thanks.
-
Hello, I am trying to activate phone call in Pyronix Enforcer 32-WE. I have tried putting my phone number instead of ARC, my phone is ringing well when alarm is triggered but nothing happens when I take the call(no message).I read that ARC messages are DTMF tone, so, How can I have notification on my mobile phone when alarm triggering ? Another one question, Can I call to Enforcer from a phone to activate my alarm or deactive it remotely ? Thanks.
-
Hi everyone. I'm new here and been lurking and reading through threads for the past few days. I'm moving house soon and have bought and pretty much finished programming the Enforcer Homecontrol+ kit. Idea is that when we get the keys most of the alarm set up is done. One thing that I'm a bit confused about are the input types. My confusion probably relates to alarm installs in general rather than specific to the panel I'm using. If i want to be able to get to the panel to enter my code by entering the house from the front or back door should I have all PIR sensors on that route set to "Entry Route" with door contacts for each set to "Final Exit"? ...and all other sensors not on that route set to "Intruder"? Really appreciate any help and sorry if this has been covered but I've not managed to find a thread on it.
-
Hi, Just wondered if anyone has installed a pyronix Enforcer by the internal front door? Thanks
-
Have just installed a Pyronix Enforcer with DigiGSM (the Enforcer GSM Kit) and am having trouble with some of the SMS functionality. The Enforcer sends SMS messages when it is supposed to, but does not respond when SMS messages are sent to it. The marketing brochure says that the DigiGSM is supposed to be able to control the panel, and should also forward any incoming SMS messages to the primary number. It isn't doing either of these. Am also trying to use the DigiGSM to dial out for UDL, but that does not seem to work either - the dial out connectivity test fails. Also, calls to the DigiGSM SIM card number are not answered despite the panel being set up to auto-answer. I'm using a SIM that doesn't support CSD (the 'data' number), but I had assumed that the SIM would still 'ring' on a call to the voice/text number and the panel would still answer. Is this supposed to work the way I'm trying to use it? The Pyronix website is confusing as it looks like the export model has different functionality (and has an app for Android), but the UK marketing brochure leads me to believe I should be able to do what I'm trying. Any help or clarification very much appreciated. At this point I just want to know if this is supported by the UK panel. If not I can give up, but if it should work I will keep troubleshooting. FWIW, everything else on the Enforcer is working like a dream.
-
Hi has anyone tried the pyronix enforcer home control+ panel and the app that you can use with it. I had a look at the manual it say that wifi will be available soon on the panel does anyone know when this will be available also I cant seen to find the Lan card for it so you can use ip instead of sim can you get the LAn cards yet Does it push the alarm though to your mobile phone app or is the risco panel and app better. I also see Honeywell Galaxy have also got a app for setting and unsettling but I dont think it push alarms thought to your phone. Has anyone tried the Galaxy app. Or what do people recomend as the best panel with app to work on ip or there will be no extra cost for monitoring.
-
