Search the Community
Showing results for tags 'Engineer'.
Found 12 results
-
Hi guys I follow this forumn from time to time but this is my first post. Had a question on my Agility 3 - I noticed on the version I have, I cannot change certain settings like: System: controls: Configuration Software Enable (Yes/No , Default is Yes) Also cannot change settings like: Default Enable (currently set to N) ARC enable Therefore, looks like I have been given the Sub-Engineer code thus limiting those changes? If I proceed with Dip3 change to default and power cycle, will it perform the reset although the “Default Enable” is currently set to No on the system? You advice will be appreciated. Many thanks Max
-
Good evening, I am writing to ask you info about the following problem. Today it has been the third time in less then 2 months that my Scantronic alarm started to make an internal sound - maybe a brief external one as well? - and give me the error "Sound Tamper Reset Required". I have performed the Engineer reset correctly all these times, but I was wondering if maybe this error means that I have to change my alarm battery. What do you think? Thanks for your help Steven -
My alarm installer is a cabbage and has left me with an alarm system that doesn't seem to be operating smoothly. He left me an engineers installation manual but the grandmaster code he wrote down doesn't work. [Link removed] details [...] to default the Grandmaster and Engineer codes back to the documented [codes] So I took the panel off the wall and carried out the following steps: [Defaulting details removed] [...] then reconnecting power makes the panel announce a tamper error and refuses to do anything on the keypad. Putting DIP switch 3 back in to the on position stops the errors but wont let me change PIN codes. So i'm stuck at the moment.... what's the missing steps to complete a reset and change of the engineer and grandmaster codes ? -
alarm Calling all nerds and experts ! Please help!!
Marcous posted a topic in !!..DIY Installers..!!
Hi all, I bit the bullet today and decided to try and repair/set up my mums alarm which has been powered down and nonworking for some time. I’ll try and state all the steps I’ve made- then it’ll help with any advice you all might offer. Please excuse my lack of knowledge and experience, I’m quite the newbie. Currently at my mums house whilst she’s away hoping to sort this for her as a surprise for when she’s home. (I believe her alarm is an sl8 ade/accenta sl compact but I’ll attach photos for confirmation) SO! after having power drop out to the keypad some time ago I checked the panel box and found the PCB was bent and cracked from being not being clipped into its slot properly back in installation back in 2000! When I pushed on the board power was temporarily and intermittently restored (wiring to the pcb was fine) so I deemed a new pcb might be worth a shot. I swapped over all the wiring and powered up. (See first two pics for the model) immediately both the internal keypad chime and exterior alarm sounded. When seeing the keypad , only the far light led (power) was lit up - all keys made a sound when pressed. (Pic of keypad attached) So, where do I go from here? My next step I assume would be to reset the panel box- enter engineer mode- set new code for alarm system and yay! Problem is I don’t know how to do this! I think from a google search the system is an sl8 compact, but it could be a g3, it’s a bit confusing! Any VERY basic step by step instruction would be much appreciated! The PCB is in the loft- so I’m sprinting downstairs to the hallway each time to check things! many thankyous.
-
And again - We are on a look out for an another engineer to work for or our northern division. Great team, loads of interesting projects.... Please send end me a message to share more details. Maciek
-
We are on a look out for a new engineer working for our northern division. It is just a beginning therefore ideal timing for right candidate. Please send end me a message to allow me to share more details. Magic
-
We are on a look for a subcontractor in Scotland (Glasgow preferably) to help with our workload. Please browse for Human Recognition Systems MSite to found out more. We also require cover for our systems at EDI and Glasgow Airports. Please PM me Maciej Furga Engineering Manager Human Recognition Systems
-
Exciting new opportunity to join a fast growing, leading Surrey based NSI Gold company, with 25 years’ experience installing and maintaining Intruder, Access control, and CCTV systems across a wide variety of contracts, from domestic and commercial premises, to major council and Police premises. We are looking for motivated individuals to join our fast growing installation and service teams.Successful applicants will have a passion for quality workmanship and customer satisfaction. They will carry out a variety of activities on behalf of Admiral Security Systems, including the planned and reactive maintenance as well as installation of CCTV, Access Control and Intruder Alarm systems. Applicants should ideally be Surrey based but this is not an essential criteria. Experience in the installation and maintenance of Intruder, access control and CCTV preferable. Full time positions available for installation and service engineers. Subcontractors will also be considered. To find out more please send your CV with a covering note to: -
Hi All, Quick intro, I currently look after the Tech Desk at Momentum Security Recruitment, feel free to get in touch to see what we roles we have on, we have been operating for over 14 years within the Security Industry. Currently working with a number of national level companies as well as SME nationwide.
-
Hi, We have a Galaxy G3 C520 system but the previous owners cancelled the contract when they left, and we're left with 'CALL ALARM CO QUOTE CODE XXXXX'. Is there any engineer in the Leicester/Derby/Notts area who could set the thing so we don't have to subscribe to ADT to get a reset code?
-
Hillis Security systems Ltd in Upminster, Essex is recruiting. We have two vacancies for installation/service engineers to join our team. The roles are attracting a competitive package including an annual salary of £24,000 to £28,000 and £28,000 to £32,000 (depending on experience). Take a look at the job description on our website and if you think you fit the bill then please send your CV with a covering letter to [No links or emails in body of posts please - welcome to the site, but please have a look at our site rules when you get a chance, ta!] -
We are NSI-Gold Fire and Security systems installers based in South West London [everything else edited - job advert]
