Search the Community
Showing results for tags 'Fault'.
Found 6 results
-
-
I have got the Texecom Premier 48 with a Battery Fault. This has happened since we had a short power-cut one evening. I have logged into engineer mode and looked at the status of the battery. The battery has 13.6v and is fully charged. I have done a walk test to make sure all the PIR’s and Door Contacts work. What I have displaying on the LCD Keypad is ‘System Alerts!’ and ‘Battery Fault’, how can I stop these messages from appearing?
-
Hi, I have an Accenta 8 alarm that was installed by the previous house owners. We haven't used the alarm in years and recently when we had a couple of power cuts the alarm sounded (it wasn't set to be on). When the power returned the alarm stoped but the keypad isn't operating properly - their is light behind the number keys but neither the 'power' nor the 'day' leds are lit up. I have read around this (and other) forums to try to work out what to do and it sounds like it may be that the battery in the main box is faulty and could possibly have damaged other parts of the system? The alarm hasn't been serviced in many years. One thing I have read to try is to 'power down and back up' the system to see if the power / day leds light again. Is this something worth trying? If so, do I have to get into the alarm box or can I just turn off the power from our RCD / fuse box to the alarm and wait a while then turn it back on? If I want to replace the battery what do I need to do? Presumably turn off the power (again at the RCD / fuse box?) and open the main alarm box? I assume that will set off the tamper alarm? How do I silence that alarm if the keypad isn't working? Sorry if these are daft questions! The basic point is, the alarm sounds during a power cut (even though it's unset) and the keypad doesn't work so it can't be silenced. The keypad isn't showing the day / power leds lit even when mains power is restored. Any advice would be greatly appreciated - I think our neighbours are getting a little fed up with the alarm going off during power cuts! Many thanks, Martin -
Hi I have an Optima/Accenta and in the last few days the alarm has just started going off for now reason (at midnight but at 3am yesterday). i have 8 zones and the panel reads like this after it has been reset 12345678 TP F0000000 00 Would really appreciate some help and advice.
-
Hi all, Another issue with my alarm. On searching on the forum, I understand that a TRBL POWER fault on the DA system Abacus is due to a faulty battery. Just wondering if I remove the cover to find out what battery to get, will all hell break lose? I've not reset the system or set it as I fear the internal sounder will just go off for hours. I just moved into this property and been left with no manuals etc. I have no engineer codes either, just the master code. I'm assuming that if I undo the cover on the box, a tamper fault will register. Do I just switch the battery and reset the system with the master code? Or is this a job for the professionals? Any advice will be greatly appreciated. thanks in advance, Titch
-
hi everybody ,i have a cp8L ALARM SYSTEM,on the control panel it says lock out can anyone help me too reset the alarm as nothing is working what i have tried
