Search the Community
Showing results for tags 'elite'.
Found 4 results
-
Hello Everybody, I'm hoping you can help me with what is (hopefully) a relatively simple fix; I upgraded the firmware on my premier elite 24 panel from 2.(something i cant rememeber) to 3.2. Since doing so when i press the area button on my control pad in the hall the system goes to part arm 2, The system is set into 2 areas; Area A = Ground Floor and Garage Area B = First Floor The control pad in the hall is set to Area A&B but I havent got the "use keypad areas" box checked in wintex, I tried it and it made no difference. The second control pad is in the second floor landing, This is set to area a only, the idea being that I set the alarm from the second floor pad at bed time and we can roam the first and second floors (no sensors on second floor) and then either dis arm from second floor in the morning or go down stairs and the hallway sensor will start the entry timer. The Parts arms are as follows; Part arm 1 - Doors and Garage Part Arm 2 - Bedtime - Seperate to only activing area A from second floor pad Part Arm 3 - Garage Only So before i updated the firmware it all worked beutifully, I press area in the hallway when leaving the house and the whole house was armed, and i pressed area on the second floor pad at night and only the grond floor and garage was armed. Like i say though, when i press area on the ground floor pad now it automatically goe's to part arm 2. I even change the configurations on part arm 2 so it was the garage only setting and part 3 was the bedtime incase something in the zone settings was confliciting but it made no difference, even with the garage as part 2 when i press area it still auto's to part 2. HELP PLEASE!!!!!!
-
I have a relatively 'smart 'house' which is connected to my phone and a number of peripherals around the house. I have built most of it myself and want to know if I can disam a Texecom Premier alarm using a discrete input from the 'house system'? I couldnt see anything obvious as the zones are the only input (I have no communicator board!). There are plenty of outputs which I have programmed to output on alarm to the 'house system' to perform various tasks. Its the ability to disarm Im a bit stuck on. Any ideas?? -
Hey guys, I've been searching for a burglar alarm for our house for a while and then I came home yesterday after a 2 week holiday and the missus has gone mad and purchased from a friend, lol. It's a Texecom Elite 24 Wired Kit. Other than slightly damaged packaging, the alarm is new and comes with a Control Panel, Keypad, COM2400 Communicator, 3 Compact IRs, 5 keyfobs, Odyssey 1E External Sounder, 8 Core Alarm Cable, 7.0ah 12v Back Up Battery, Anti Masking Dual Technology PIR Burglar Alarm Surface Contact Her friend had bought this about a month ago to install in his property, but decided against installing as it and ended up purchasing a Visonic powermaster 33 as he wanted a wireless setup to avoid damaging the floor tiles. Anyway I'm now stuck with this and don't have a clue where to start from, so I joined this forum. I do have some knowledge about alarms, but usually they are well-known like yale or response. Could anyone help me with this? Before I install the cable wiring, I want to try out the alarm as it is. Once I feel I'm competent enough, I will then move to installing it properly.
-
I used to be selfemployd before retirering and mostly i used to instal Scantronic panels at that time and lately I have been interested in the Texecom range. Hope to be of help in this forum
