Search the Community
Showing results for tags 'euro 46 app'.
Found 2 results
-
Evening all, I'm installing a Euro 46 V10 panel for a friend, along with the DIGI-LAN communicator for app capability. I've fitted a few of these Pyronix (and previously Castle) panels before, but I'm a bit stumped with the conflicting instructions that came with communicator and the panel. Below is the an excerpt from the DIGI-LAN installation manual: As you can see it suggests to use the included power cable to get power from the Aux 12v terminal. (Assuming Euro 46 App and V10 are the same thing in this case.) Below is an excerpt from the 'communications guide' that came with the Euro 46 V10: Now it's telling me not to hook up the power input... When I fitted one of the older 2016 Euro 46 App panels (before they came out with the V10), I used the power cable with the DIGI-LAN and it worked fine. Can I assume it is safe to use the power cable with the DIGI-LAN and Euro 46 V10? I'd rather be certain that chance it. The one downside of buying Pyronix is that I cannot ask them myself, but I am hoping one of you may know the answer..... Thanks in advance, Saaj
-
So I'm just playing with my alarm to get head round it have so far fitted bell box, front door contact and hall PIR. Question is when I go to set the alarm I walk to the panel in the hall I have to walk past the PIR. I go to set the alarm but can't as the PIR is active I have to wait 10 or so seconds for the PIR to deactivate then I can set it. Is that right ? I have read the instructions but can't see anywhere about it. Anyone any ideas the alarm works fine or once set the PIR will set the alarm off if moving in front of it and have set the final edit as the front door and that works fine. Any ideas ? Thanks Mark
