Search the Community
Showing results for tags 'expander'.
Found 2 results
-
Hello, I have wired an extension and been asked to add a couple of PIR's and Door contacts to an existing Bells only system its a Scantronic 9651. There are not enough zones present in the panel so have added a 9954 expander. Now the problem is that I cant find the extra zones, The system has 2 keypads, one with no link the other with id 2 link. The 9954 has no link set for id. Do I need to kick start the panel? will this delete config or passcodes? I am expecting the extra zones to appear as zone 9 onwards as the id is not set in the expander. I know the Menvier panels can be asked to rescan the system hardware, is this possible or nescessary on the 9954? Any advice would be much appreciated. Thank you Dave
-
Hi guys. Just added a standalone expander board ( 8exp I think) to a system we fitted a few years ago. Existing system already has a plug on expander fitted. Fitted new expander, confirmed devices, both boards showing up correctly as 1 and 2. Programed new zones, wiring programmed as Normaly closed all appeared good. In walk test and when alarm set all new zones showing as closed and not activating when zone is walked? I am missing something but not sure what. Thanks all
