Search the Community
Showing results for tags 'galaxy g2'.
Found 2 results
-
Hi, 8 years ago I installed a Honeywell Galaxy G2-20 (including a RIO and a couple of wireless PIRs) and have enjoyed faultless service from it until recently. I now regularly (3 or 4 times a day) get an RF Jam error. Any ideas what the cause could be and what I can do about it? I've read the manual and other than configuring the 'stop set' to allow you to set the alarm with the fault condition unacknowledged I can't see any settings which might help Thanks in advance, Binney
-
Hi All I’m looking for some help with setting up remote monitoring on my self-installed Galaxy G2-20 panel. Here is a quick description of my system: Galaxy G2-20 Panel [Firmware 1.55] RF Portal [ C079-2 ] Ethernet Module [ GT-20 ] Two Keypads [ 1x Touchcenter, 1x MK7 ] 6x Wired PIR’s [ DT8016F5 ]; 3x Wireless PIR’s [ IR(PI)8M ] 2x Wired Door Contacts; 1x Wireless Door Contact [ D0800M ] 1x Outdoor Sounder [AG8] & 1x Indoor Sounder All is working very well but the getting a remote connection set up has defeated me. My aim is to subscribe to the SelfMon IP Monitoring Platform by SM ALARMS. Looking at the installation manual for the GT-20 Ethernet Module it seems that there are G2 Panels that support an Ethernet Module and some G2 Panels that don’t (for panels that don’t support an ethernet module is says the GT-20 simulates an External Telephone Module). I’m unclear whether my panel supports the module or not – how do you determine this? I assume it is by firmware version? Regardless, I have followed the instructions for both options and I am not making very much progress. The module is connected to my home network and using the FING App I can see it sat on my network. When I ping the IP address, I get 100% success and no packet loss. I have downloaded the SM Alarms Andriod VirtualKeypad App and cannot connect to the panel using it – trying lots of configurations along the way. I have also downloaded their Windows/Java Galaxy VirtualKeypad and with this I achieve partial success – in the Command Window it reports that I have logged in and connected to the G2 Panel – but I am unable to then connect to the panel using my browser once connected (the browser says page is unavailable). On the SM Alarms website it states that the Android app version of the VirtualKeypad works with the GT-20 module (although I note the website does list the GT-20 as compatible with the Windows version). I would be grateful for some help and ideas please.
