Search the Community
Showing results for tags 'manual'.
Found 4 results
-
Hello does anyone have an installer & users manual for an Ademco Galaxy 16 plus?
-
Hey All, Just thought i’d join and see if anybody can offer me some advice. I have a Risco Agility 3 with GSM Module for text message alerts. On installation I opted not to pay the monthly £13 fee for Alarm Maintenence as all it is really is battery replacements. All has been going well until recently when I had to replace a wireless shock sensor which is the closest to the main pcu board but also runs out of battery power after 2-3 months (they are lithium batteries and should last well over a year) The second issue is a wireless mag contact which also needed battery replacing. After replacing battery, I performed the walk test to re-initialise into the system and then I am able to set the alarm fine. The issue with this mag contact is that if the door has been open within 30-45mins of wanting to set the alarm, I cant, it tells me that the system isnt ready. After about an hour, I can set the alarm again. Awaiting a callback but the engineer said he rang Risco and they have apparently advised that the battery replacement and walk test need to be done under engineer’s menu and not customer menu. Is this the case in anyones experience ? Any thoughts ? Also, is there a downloadable pdf or something somewhere on giving a menu walkthrough process of the keypad ? Thanks in advance, Scott -
hi all moved into a property recently but the alarm boxes outside kept going off when there was a power cut/ did electrical work on the upstairs ring and the full alarm goes off when power comes back on. I read that this is due to a dud battery but on opening the alarm i found the battery was not connected, neither was the tamper switch. there are two very thin wires connected to the + which do not appear to be secured properly top anything and io do not have an engineer code. I can't see any labels on the board that specify what the make of the al[arm is and was hoping someone might recognise it. there is a date reference to Sept 2000 on it though. Many thanks mdavies
-
