Search the Community
Showing results for tags 'securit'.
Found 3 results
-
Hi there, I'm just after some general advice regarding a security system I have installed in the house I just bought. It is a (C&K Securitech) Securit 700L, and the internal battery is apparently dead, as when the mains is cut, the external alarm (bell box) sounds, presumably powered by an independent back up battery. I have both the user and engineer guides (available online), neither of which have instructions for battery replacement. I would ideally like to know the model of battery required, and also which of the following methods should be followed to replace: EITHER 1) Remove cover from main panel (which will presumably trip a tamper alarm) - then enter the user code to acknowledge the tamper - then replace the battery, OR 2) Enter the engineer code - then remove the cover from the main panel - then replace the battery - then press reset. I'm hoping someone will have experience with this or other similar Securit systems and will be able to advise, then it should be a simple job to do myself. Any help greatly appreciated!
-
I've noticed there is still interest in the Securit 700L Plus. I have one, recently removed from my home due to an upgrade. It is in perfect working order and good condition. See photos. Open to offers.
-
Hello, first post! I've got a Securit 700L system with zones 1, 2, 3 & 4 used with PIRs. Zone 1 is by default Entry / Exit. I'd like to make Zone 3 the same, so I can enter/leave via a door in that zone also. I've got the manuals but cannot see a way of doing it... Any clues would be welcome!!!! Thanks.
