Guest md1 Posted August 8, 2006 Posted August 8, 2006 Hiya, We've just recently moved into a house with a homeguard scopetronic alarm system fitted. We've no manual for it and I was wondering if anyone out there might be able to help us. Also my mate was fiddling around with it yesterday trying to isolate zones (I'm not sure exactly what he pressed) but now we can't set the alarm. When I input the code it flashes "U A 2" and nothing happens. Can anyone out there please help? we're going away next week and would feel an awful lot better if the alarm could be set. Thanks!
FASTCAR Posted August 8, 2006 Posted August 8, 2006 Try 0 , then code. The user instructions should be printed on the front.
jnealon Posted August 8, 2006 Posted August 8, 2006 A2 usually means that zone two is open. 0#4 turns on that panel. To isolate a zone it is 0#4*zone* www.realsecurity.ie
Guest md1 Posted August 8, 2006 Posted August 8, 2006 A2 usually means that zone two is open. 0#4 turns on that panel. To isolate a zone it is 0#4*zone* Ah thanks a million for that! Really appreciate it! It's working now again!
Recommended Posts
Archived
This topic is now archived and is closed to further replies.