PaulButler Posted March 25, 2007 Share Posted March 25, 2007 I have a Scantronic 9448 that's not working properly after a power cut. The control panel has the Power Light on but will not accept any codes and the outside alarm is flashing. Any ideas whats wrong? Any help would be appreciated. Link to comment Share on other sites More sharing options...
kka Posted March 25, 2007 Share Posted March 25, 2007 on this site there aresome companies list by police force are 4 listings of companies in the north yorkshire police force area 5 listings of companies in the south yorkshire police force area. give them a call, some might have a look for free before advising you of the cost. scanny are quite robust panels it may well be worth getting it serviced, but beware if the charging circuit is damaged it will mean a new panel oops nearly forgot 3 listing in the west yorshire force area Kevin Scott. Owner of KK Alarms...... Installation .. Service .. Repair ...... Thoughout.. Northumberland and North Tyneside ..... Tel:01670 361948 (call diverted after 15 seconds) or 07947444114 Link to comment Share on other sites More sharing options...
Guest anguscanplay Posted March 25, 2007 Share Posted March 25, 2007 Hi PaulJust guessing not been serviced for a few years, diagnosis battery failure possible charging circuit damage. My advice would be to get it serviced. Lenny most certainly and get it seen to quickly that flashing light could lead to a fine! Link to comment Share on other sites More sharing options...
mjw Posted March 25, 2007 Share Posted March 25, 2007 most certainly and get it seen to quickly that flashing light could lead to a fine! In 22 years of being in this industry never have i heard of anyone being fined for a flashing light? Link to comment Share on other sites More sharing options...
Guest anguscanplay Posted March 25, 2007 Share Posted March 25, 2007 In 22 years of being in this industry never have i heard of anyone being fined for a flashing light? yep always been an issue with enviromental health but since the new control area legislation ( think thats right ) its getting quite comman up here can see why they brought it up with good double glazing the sound for twenty minutes aint so bad but you have a light flashing oposite your window all night - actually for a fortnight as most people connect the strobe wrongly and its serious nieghbour dispute time Link to comment Share on other sites More sharing options...
camerabloke Posted March 26, 2007 Share Posted March 26, 2007 In 22 years of being in this industry never have i heard of anyone being fined for a flashing light? i got fined after being pulled over by a "blue flashing light" does that count? Eucam Security Systems 0845 4630 746 www.eucam.co.uk Link to comment Share on other sites More sharing options...
kka Posted March 26, 2007 Share Posted March 26, 2007 i got fined after being pulled over by a "blue flashing light" does that count? me too, many moons ago Kevin Scott. Owner of KK Alarms...... Installation .. Service .. Repair ...... Thoughout.. Northumberland and North Tyneside ..... Tel:01670 361948 (call diverted after 15 seconds) or 07947444114 Link to comment Share on other sites More sharing options...
luggsey Posted March 26, 2007 Share Posted March 26, 2007 me too, many moons ago Who got pulled for flashing? ----------------------------------------------------------------------------------------------------------------------------------- Life is like a box of chocolates, some bugger always gets the nice ones! My Amateur Radio Forum Link to comment Share on other sites More sharing options...
kka Posted March 27, 2007 Share Posted March 27, 2007 Who got pulled for flashing? Kevin Scott. Owner of KK Alarms...... Installation .. Service .. Repair ...... Thoughout.. Northumberland and North Tyneside ..... Tel:01670 361948 (call diverted after 15 seconds) or 07947444114 Link to comment Share on other sites More sharing options...
Alarmsman Posted April 4, 2007 Share Posted April 4, 2007 Paul did you get it sorted out, look llooks ike the panel gone back to factory settings the code now will be ****, If that dont work let me its E Z to repair you can do it youself Bob.... Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.