Jump to content
Security Installer Community

Yeb Bell Box


GARYF

Recommended Posts

Hi everybody,

My first post so bear with me! I have a Citadel XR2 panel and a YEB (Yorkshire Electricity Board) bell box/strobe. My siren no longer sounds. I have gone into engineer mode and tried the tests but even though the strobe works, the siren does not. Can anybody advise me what (if anything) to check or should i buy a new bell box, (any recommendations to go with the Citadel XR2 panel?)

Many thanks in advance,

Gary.

Link to comment
Share on other sites

Hi everybody,

My first post so bear with me! I have a Citadel XR2 panel and a YEB (Yorkshire Electricity Board) bell box/strobe. My siren no longer sounds. I have gone into engineer mode and tried the tests but even though the strobe works, the siren does not. Can anybody advise me what (if anything) to check or should i buy a new bell box, (any recommendations to go with the Citadel XR2 panel?)

Many thanks in advance,

Gary.

have you had any work done? cut wires ect?

although as your strobe is working the cable is probably ok.

i would recommend testing the cable out, and if ok a new bell box.

Link to comment
Share on other sites

Guest anguscanplay
have you had any work done? cut wires ect?

although as your strobe is working the cable is probably ok.

i would recommend testing the cable out, and if ok a new bell box.

a few good ones on here

[Link removed

er who owns that site ?

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.