Guest magpie Posted June 20, 2003 Posted June 20, 2003 Hi there I have just moved into a new property,with a Modern Security Systems 3200+ control panel installed (about 1997 ?) I have the user PIN No.The unit was moniterd by //.National Installer.// for the previous tenant & has No bell box fitted. I now wish to install a bell box but require the engineers PIN or the instructions to reset to factory settings. Can anyone help please.
Service Engineer Posted June 20, 2003 Posted June 20, 2003 I have an incling that this is a re branded Scantronic 9500. Ill make a few enquiries for you. ........................................................ Dave Partridge (Romec Service Engineer)
Service Engineer Posted June 20, 2003 Posted June 20, 2003 Is it either of these ? | ........................................................ Dave Partridge (Romec Service Engineer)
JB_ Posted June 20, 2003 Posted June 20, 2003 I might be wrong but i think 4300 was their model number for the 9500. I'm probably wrong tbh.
Guest MARK Posted June 28, 2003 Posted June 28, 2003 the two pictures that service engineer posted the top one the 9500 was called a modern 4500. played a tune u know!!!! And the second one was branded the modern 3000
Guest magpie Posted June 29, 2003 Posted June 29, 2003 Thanks very much for the replies & info.The manual attatched to the e-mail from Dave should do the trick ! Sorry for not acknowledging the previous postings I've been away on my jolly days
Recommended Posts
Archived
This topic is now archived and is closed to further replies.