TimPickles Posted October 1, 2008 Posted October 1, 2008 Heres one for you guys who have wired the DSC panels, usued in the original Brit Gas instasll, to a standard SAB bellbox. How did you do it?? Like the GE/Honeywell/Napco panels, the DSC has a straight forward bell output +ve and -ve 12V. No tamper, hold off etc. Really simple I'm sure, but my brain is on slow today!! Thanks guys
j.paul Posted October 1, 2008 Posted October 1, 2008 Heres one for you guys who have wired the DSC panels, usued in the original Brit Gas instasll, to a standard SAB bellbox.How did you do it?? Like the GE/Honeywell/Napco panels, the DSC has a straight forward bell output +ve and -ve 12V. No tamper, hold off etc. Really simple I'm sure, but my brain is on slow today!! Thanks guys The bell output is monitored with 1k resistor, so you can use this to give SAB tampers or you coud use a spare zone.. There are no stupid questions, but there are a LOT of inquisitive idiots.
TimPickles Posted October 1, 2008 Author Posted October 1, 2008 The bell output is monitored with 1k resistor, so you can use this to give SAB tampers or you coud use a spare zone.. Thats great thanks. Fortuneatly, no-one is too bothered with Tampers in this part of the world, it was really just tying up the loose ends in the bellbox (Nova 6).
SOFIENE Posted October 3, 2008 Posted October 3, 2008 Try this wired Steps: External SAB DSC Pannel (-) AUX - (+) Bell + TC1 Bell - BL1 PGM progarmmed in [009] as : 10 System Event Tamper_1 AUX+ Tamper_2 1K_Ohm Bell
Recommended Posts
Archived
This topic is now archived and is closed to further replies.