trickydickie Posted May 1, 2009 Posted May 1, 2009 Hi all I am electrical/Electronic trained, however i am not really familiar with alarm panels, and am in the process of changing mine out and only the bell wiring confuses me, rest is ok Old unit is an Optima XM6 connections Strobe + - no connection Strobe - White wire SCB T - Blue wire SCB A - Black wire Bell D + - Red wire Bell B - - Yellow wire New Unit Scantronic 9448 connections STR Bell 12V 0V TR I think i know how it should be, but would be appreciative if someone could reply with the correct wiring, thanks in advance
Rulland Posted May 1, 2009 Posted May 1, 2009 Hi, And welcome to the forum, conns are as follows: 12v=red 0v=black str=white bell=yellow tr=blue Regards,Richard
trickydickie Posted May 1, 2009 Author Posted May 1, 2009 Wow fast reply thanks very much Richard, much obliged
lawandorder Posted May 1, 2009 Posted May 1, 2009 Hi, And welcome to the forum, conns are as follows:12v=red 0v=black str=white bell=yellow tr=blue Regards,Richard QFA Spot on
Recommended Posts
Archived
This topic is now archived and is closed to further replies.