IAS Posted May 23, 2011 Posted May 23, 2011 Looks like it will be two contacts in series into one EOL circuit. sorry, which panel, what grade etc .......... and any chance of a drawing how you intend to do it? Quote
progear Posted May 27, 2011 Author Posted May 27, 2011 sorry, which panel, what grade etc .......... and any chance of a drawing how you intend to do it? Hmmm..... Tricky to put into words, like a set of double doors two contacts across 1 resister then EOL and back to the panel. Its a grade 2 system so all connections will need to be made in appropriate JB's. I plan to series up the tampers i.e. R/S loop and JB switches then sort the 2 contacts across one resister bit. Quote
progear Posted May 28, 2011 Author Posted May 28, 2011 Well I haven't gave the G3 option any thought because it's a G2 system but.....correct me if I'm wrong thats why I'm on this forum, the circuit wiring will stay the same but the RS's will need to have magnetic tampering detection the JB's are already G3 so no change there. Is there anything else? Quote
alterEGO Posted May 28, 2011 Posted May 28, 2011 Well I haven't gave the G3 option any thought because it's a G2 system but.....correct me if I'm wrong thats why I'm on this forum, the circuit wiring will stay the same but the RS's will need to have magnetic tampering detection the JB's are already G3 so no change there. Is there anything else? He is just trying to catch you out, trick question. Quote
Oxford Posted May 29, 2011 Posted May 29, 2011 As far as I can see from this post, it's a grade 2 system so you'll be fine with a single contact. Quote
alterEGO Posted May 29, 2011 Posted May 29, 2011 As far as I can see from this post, it's a grade 2 system so you'll be fine with a single contact. That is not correct, the grade makes no difference to the amount of contacts. If the shutter requires 2 due to size then it gets 2. We tend to go with a contact and IR beam these days due to shutter being cut or rammed. Quote
Oxford Posted May 29, 2011 Posted May 29, 2011 a 3m roller will be fine with1 contact - that's all I was saying. Quote
Michael Boty Posted June 19, 2011 Posted June 19, 2011 I was wondering is there any regs reguarding when a roller shutter is wide enough to need a contact on both sides? I have a job starting soon and the R/Shutters are about 3.3m wide. Over 6 feet wide, 2 Contacts. Measurement gives age of advice but holds well. Not nice to see door wedged open other side to contact and access gained by undesireables. Quote
psycho_49 Posted February 16, 2012 Posted February 16, 2012 Not only that but roller shutter contacts have very high tollerence sometimes upto 30 mm therefore over 3mtrs should really be 2 contacts confimed right away, or intruder if lifted from one side.. Quote
Ronnie Posted February 16, 2012 Posted February 16, 2012 2 contacts confimed right away, or intruder if lifted from one side.. Are you for real? Please tell me you don't work in this industry full time? Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.