njinstallation Posted November 6, 2011 Posted November 6, 2011 hi just fitting a g3 panel and has come with elmdene contacts, ive not fitted galaxy for about 5 years, and last time i did this i fitted resistors in contact, these have already got them in has anyone got a scematic of how these should be wired in elmdene jb. thanks www.ashdene-uk.com
james.wilson Posted November 6, 2011 Posted November 6, 2011 Which ones are you fitting? securitywarehouse Security Supplies from Security Warehouse Trade Members please contact us for your TSI vetted trade discount.
PeterJames Posted November 6, 2011 Posted November 6, 2011 Why do you need a schemetic for two wires?
james.wilson Posted November 6, 2011 Posted November 6, 2011 its more than 2 mate. see above securitywarehouse Security Supplies from Security Warehouse Trade Members please contact us for your TSI vetted trade discount.
fozzies Posted November 6, 2011 Posted November 6, 2011 Looking at that diag its a 4737 contact with a resistor network jb?
njinstallation Posted November 6, 2011 Author Posted November 6, 2011 EN3-QFC flush contacts and EN3-JB10 Junction Box www.ashdene-uk.com
james.wilson Posted November 6, 2011 Posted November 6, 2011 nope the resistors are in the contact and they are sealed units. Im assuming he has sealed ones as the diagram is different for the terminal ones lol securitywarehouse Security Supplies from Security Warehouse Trade Members please contact us for your TSI vetted trade discount.
njinstallation Posted November 6, 2011 Author Posted November 6, 2011 yes there sealed units, it says honeywell 1k is green band , so will this be green and white www.ashdene-uk.com
fozzies Posted November 6, 2011 Posted November 6, 2011 Ahhh so green and white connect straight through, run one of em thro the tamper though
Ronnie Posted November 7, 2011 Posted November 7, 2011 we use elmdene for all our contacts and they call come with instructions...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.