antinode Posted May 21, 2013 Posted May 21, 2013 I'd say he was right to pull you on that! Trade Member
Lwillis Posted May 21, 2013 Posted May 21, 2013 I'd say he was right to pull you on that!+1 That means the contact wasn't actually tampered as is wasn't connected into the circuit
matthew.brough Posted May 21, 2013 Posted May 21, 2013 not sure matthew but seems my butt is covered if they are grade 2 anyway !! on another matter i had an inspection the other week and when he inspected the roller shutter contact he pulled me up because i hadnt connected the tamper from the JB to the contact (inside the protected lead). i had connected a pair in the JB (4k7) but he insisted i use the loop inside the lead so the tamper runs all the way to the contact. the JB was tamper proof I'd share the inspectors view. www.securitywarehouse.co.uk/catalog/
sixwheeledbeast Posted May 21, 2013 Posted May 21, 2013 I'd say he was right to pull you on that! Agreed
sjsturner Posted May 22, 2013 Posted May 22, 2013 +1 That means the contact wasn't actually tampered as is wasn't connected into the circuit +2 Thats what inspectors are for.
sjsturner Posted May 22, 2013 Posted May 22, 2013 Speaking of which anyone know where i can get rdc with about 1 and a half metre lead?
antinode Posted May 22, 2013 Posted May 22, 2013 We use the Aritech DC108 which comes with about 2 meters of lead. We get them from Enterprise. They're G2 only though. Trade Member
sixwheeledbeast Posted May 22, 2013 Posted May 22, 2013 We use the Aritech DC108 which comes with about 2 meters of lead. Ditto. Solid units, been using them for years.
Recommended Posts
Archived
This topic is now archived and is closed to further replies.