Oxo Posted May 31, 2013 Posted May 31, 2013 Cannot fault it. Surveyors and end users need a tad more info than is provided at times but top kit. One site was so kerplucked it needed 1500 mtrs from PSU to Gate and Door Station. Stabilised it with a spare core, with video to 12 homes. They say 30 mtrs tops. Why I love it. And hate the shiittee people do to it.
PSE Posted May 31, 2013 Posted May 31, 2013 The problem is, Its like anything.... We cant always blame the equipment when an installation fails, It could be for a number of reasons. Like the issue I had witht he above school, Lack of the product, the system design and poor installation will all lead to issues with any manufacturers products. I have an apartment block local to me with 42 apartments. It also has Comlit installed, I got the nastiest photos you could ever imagine. This whole install is dead We have spend a week there tracing cables and toning everything out with very horrid results, Where does it all end
Oxo Posted May 31, 2013 Posted May 31, 2013 I agree. Takeovers can be a PITA, but some equipment needs to be respected. Some you would rip out without question. Comelit and Nice are not ones I would associate with the last statement.
Rulland Posted May 31, 2013 Posted May 31, 2013 Not wanting to hijack the thread but talking of Comlit stuff, just wondering about the security of their prox stuff, fitted a few comelit prox readers, specified by client, but all fob data is held in reader and all the reader has is NO/NC contacts that then interface with whatever access control you are using. Surely that is not a secure system, short two cores on the reader and you're in!-readers I normally use have a remote panel and shorting anything at the reader will at best blow a fuse and not allow access. Also if a Comelit reader is destroyed/removed, all user data is gone also, not just a case of replacing reader and alls up and running. Just wanted a bit of feedback tbh-Comelit prog all the fobs before despatch, any views on the pro's and cons-obviously there may be be more than one Comelit reader than the one my client has specced for us to use.
PSE Posted May 31, 2013 Posted May 31, 2013 I stand to be corrected on the comlit side, but I detest nice stuff with a passion You're not going to like my opinion of Nice then, At the risk of it going off, I will keep me gob shut on that one. Haha For me, automation has to be BFT, shear quality and reliability with all their range. I do use CAME also, but all new installs I design and install are bft
MrHappy Posted May 31, 2013 Posted May 31, 2013 phwoar.... access control porn & blonde schoolies in stockings last time I looked at website like that it wanted a credit card payment Mr Veritas God
Oxo Posted May 31, 2013 Posted May 31, 2013 I think our likes and dislikes have now to be taken to the trade side. We all have our preferences.
alterEGO Posted May 31, 2013 Posted May 31, 2013 I'm a BFT fan. Also just installed a telguard gsm intercom, didn't want to at first due to cost, but its the best bit of kit I have found in years. So many features, and the obvious no lock connection in the call units.
Oxo Posted May 31, 2013 Posted May 31, 2013 What obvious thing ? You obviously feel the need to mention?
alterEGO Posted May 31, 2013 Posted May 31, 2013 I did say it, they have no lock connection/relay in the call units.
Recommended Posts
Archived
This topic is now archived and is closed to further replies.