Guest anguscanplay Posted June 28, 2007 Posted June 28, 2007 Hi Fastcar or any other expert here, please help. had a fine working optima xl6 alarm system, had lights changed by an electrician 2 days ago and since then the alarm isnt working, there is only the red light of power which is lit, no sound on pressing any buttons, the sensors are working and there is also lights under the buttons of the alarm, tried all tricks of mains etc.. please help, , pep. simple get the sparks back - it worked before now it doesnt - might be no mains , might be duff battery
bluetigeruk Posted July 27, 2007 Posted July 27, 2007 (edited) I`ve emailed you the manual. Please send me one as well. Yesterday power cut, it was noising for hours. Thanks. Edited October 19, 2008 by Chorlton
alterEGO Posted July 27, 2007 Posted July 27, 2007 Please send me one as well. Yesterday power cut, it was noising for hours. Thanks. a manual won't fix that i'm afraid, do a search on here. if that is no help post your location and some one will offer you the help you need.
nmeese Posted August 24, 2007 Posted August 24, 2007 Hi all. I've an Optima XL6 alarm. It seems we must have some problem with our electrical system as the fuse that the alarm is wired keeps blowing out. As a result the alarm has been going off for just over two hours now and is still going strong (starting at 5am in the morning!). Is there anything I can do to stop it? Any help/ suggestions would be greatly appreciated. Nick.
amateurandy Posted August 24, 2007 Posted August 24, 2007 (edited) Hi all.I've an Optima XL6 alarm. It seems we must have some problem with our electrical system as the fuse that the alarm is wired keeps blowing out. As a result the alarm has been going off for just over two hours now and is still going strong (starting at 5am in the morning!). Is there anything I can do to stop it? Any help/ suggestions would be greatly appreciated. Nick. Unfortunately you have 3 basic choices: 1. Wait until the batteries run out and leave it disconnected 2. Sledgehammer! 3. Call out an alarm engineer As you probably realise, methods on how to disable an alarm can be of great use to burglars so can't be posted here in public. PS Oddly enough an alarm over the road from me has been going off now for about 10 minutes - everyone is ignoring it. Edited August 24, 2007 by amateurandy
Guest anguscanplay Posted August 24, 2007 Posted August 24, 2007 Unfortunately you have 3 basic choices:1. Wait until the batteries run out and leave it disconnected 2. Sledgehammer! 3. Call out an alarm engineer As you probably realise, methods on how to disable an alarm can be of great use to burglars so can't be posted here in public. PS Oddly enough an alarm over the road from me has been going off now for about 10 minutes - everyone is ignoring it. well not quite - youve had a look obviously ( its an old chestnut )
amateurandy Posted August 24, 2007 Posted August 24, 2007 well not quite - youve had a look obviously ( its an old chestnut ) Nope. It's one that's always going off randomly so I recognise it's sound. It's also at a house where there's a very loud car alarm that goes off for about 15 seconds every time they use the car - dunno why, presumably a dumb design or incorrectly fitted. It wails then makes 3 or 4 loud beeps as they disarm it. As they regularly go out early and wake people up with it they get no sympathy.
jaywell Posted September 8, 2007 Posted September 8, 2007 Hi, Ive lived with my Optima xl6 alarm for the past 7 years since we moved in, we have no idea how to isolate zones-we'd be really grateful if someone would E-mail us the user manual. I have seen the single page of instructions about how to change the code/memory and test but wonder if there is any more information out there. Many Thanks
kazzacorry Posted September 10, 2007 Posted September 10, 2007 Hi. Could somebody please send me a copy of this manual. Many thanks. hi soz to be a pain but could antone plz forward me a manual to thanx
kazzacorry Posted September 10, 2007 Posted September 10, 2007 hi soz to be a pain but could antone plz forward me a manual to thanx
Recommended Posts