johng Posted June 17, 2013 Share Posted June 17, 2013 I installed the above Security Alarm System approx. 2 years ago and it has worked fine! In the last few days however I have noticed a problem! When I set the Alarm, the exit tone ceases when I open the Exit Door then it starts again when I close the Exit Door! Prior to this happening, after setting the Alarm, the exit tone increased in tempo when I opened the Exit Door and then resumed at normal tempo when I closed the Exit Door! I have restored the Panel to Factory Settings and then I have reprogrammed it but to no avail! Any assistance would be most appreciated! Link to comment Share on other sites More sharing options...
james.wilson Posted June 17, 2013 Share Posted June 17, 2013 That sounds normal. Iirc that panel beeps to circuit number that is open on exit. Ie 4 bips for circuit 4 etc securitywarehouse Security Supplies from Security Warehouse Trade Members please contact us for your TSI vetted trade discount. Link to comment Share on other sites More sharing options...
johng Posted June 17, 2013 Author Share Posted June 17, 2013 Thanks for your reply but I still cannot understand why the "beeps" do not occur now whereas a few days ago they did! Link to comment Share on other sites More sharing options...
james.wilson Posted June 17, 2013 Share Posted June 17, 2013 Is the contact working ok? securitywarehouse Security Supplies from Security Warehouse Trade Members please contact us for your TSI vetted trade discount. Link to comment Share on other sites More sharing options...
johng Posted June 17, 2013 Author Share Posted June 17, 2013 Yes the contact is working ok! After rechecking (my hearing is very bad!), I have realised that the Panel does in fact "beep" but the additional sounder that I fitted in the Panel stops sounding on exit when I open the Exit Door but starts again when I shut the Exit Door! When I re enter my property the additional sounder works fine!!! Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.