timmo66 Posted January 20, 2014 Posted January 20, 2014 Does anybody know if you can get into the dome menu on a videcon speed dome (connected to a videcon vxh264.4) without a keyboard?
timmo66 Posted January 20, 2014 Author Posted January 20, 2014 I am not yet. Will be getting to that tomorrow, but a keyboard hasnt been allowed for apparantly.
Belfastengineer Posted January 20, 2014 Posted January 20, 2014 Put on Pelco D/P and preset 95 should get you in
timmo66 Posted January 20, 2014 Author Posted January 20, 2014 Can preset 95 be done from the dvr remote?
Belfastengineer Posted January 20, 2014 Posted January 20, 2014 not sure never used a videcon dvr. You could use a cctv test monitor which has ptz control
timmo66 Posted January 20, 2014 Author Posted January 20, 2014 How would you do preset 95 then without a keyboard? I have never used any videcon product before so its all new to me.
Belfastengineer Posted January 20, 2014 Posted January 20, 2014 Nomally on a DVR GUI there is an option to control ptz and call presets.
Amps Posted January 20, 2014 Posted January 20, 2014 Does anybody know if you can get into the dome menu on a videcon speed dome (connected to a videcon vxh264.4) without a keyboard? You will need a keyboard 100%. Concept Pro VA-KBDPRO+_user_manual.pdf Concept Pro_VXH264-8_MANUAL.pdf
Belfastengineer Posted January 20, 2014 Posted January 20, 2014 You sure page 18 shows you can set and goto preset
Recommended Posts
Archived
This topic is now archived and is closed to further replies.