garsec Posted February 1, 2014 Posted February 1, 2014 I have a job on tomorrow to move a phone socket, no biggy there, but the site has one socket, one phone number and can run two independant phones without a pabx etc ?? i have plugged my test phone in, checked the number, rung it, tied the line up with a call to my mobile, then rung the same number from another mobile and it rings, not an engaged tone ? not seen this before can someone please explain how it works and if any special kit is required Employed by an NSI GOLD company Any comments or views i have are my own, and do not represent that of my employer or clients.
datadiffusion Posted February 1, 2014 Posted February 1, 2014 AKA Featureline http://www.globalservices.bt.com/uk/en/products/featureline There is nothing special to worry about at the sub end. So, I've decided to take my work back underground.... to stop it falling into the wrong hands
garsec Posted February 1, 2014 Author Posted February 1, 2014 , i was assuming feature line,but wasnt sure if special handsets etc were required, so i can just plug a double phone adapter into the nte and it will work as two seperate phones ? Employed by an NSI GOLD company Any comments or views i have are my own, and do not represent that of my employer or clients.
Recommended Posts
Archived
This topic is now archived and is closed to further replies.