seanxb Posted July 1, 2014 Share Posted July 1, 2014 Afternoon, After much searching and nearly getting there, I still have 1 hurdle to overcome. I have a Concept Panel and I have replaced my old bell box with a Challenger AU1000WBX. All is working except for the strobe, which frustratingly is not! I have made the following connections. Could someone possibly advise where I may have gone wrong? Bellbox STB- to Panel Strobe- Bellbox 12V+ to Panel D Bell Bellbox 12V- to Panel A 0 Volts Bellbox Tamper to Panel T Tamper Return Bellbox Trig - to Panel B Trig I would have expected that the Strobe + in the panel would also have to be connected in the Bell Box nut I was initially advised not to I have attached a view of the panel and bell box connections from the manuals. Any help would be appreciated. Sean. Alarm.pdf Link to comment Share on other sites More sharing options...
james.wilson Posted July 1, 2014 Share Posted July 1, 2014 Is the strobe output working? securitywarehouse Security Supplies from Security Warehouse Trade Members please contact us for your TSI vetted trade discount. Link to comment Share on other sites More sharing options...
sixwheeledbeast Posted July 1, 2014 Share Posted July 1, 2014 Yep seems wired correctly. Test the output with a multimeter. Link to comment Share on other sites More sharing options...
seanxb Posted July 1, 2014 Author Share Posted July 1, 2014 I'm not sure if the output is working. I do I have a multimeter but unsure how to test. Could you advise please? Thank you. Link to comment Share on other sites More sharing options...
james.wilson Posted July 1, 2014 Share Posted July 1, 2014 Put your meter on 20v dc and see if there is 12 - 14v across strobe pos and neg when it should be going. securitywarehouse Security Supplies from Security Warehouse Trade Members please contact us for your TSI vetted trade discount. Link to comment Share on other sites More sharing options...
al-yeti Posted July 2, 2014 Share Posted July 2, 2014 Or swap the bell and strobe see if it works Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.