tst Posted September 10, 2014 Posted September 10, 2014 Hi all, I have an ADT system which was installed when I moved in by the previous owner 4 years ago. The display is now showing adt bat mis 0001 and also manager reset code required. I do have that code but I don't know what to do? I have read that it's most probably the battery that needs replacing. Can anyone please advise and if it is battery, where can I buy replacement from? Thanks
morph Posted September 10, 2014 Posted September 10, 2014 ADT will sell you a battery and show you how to reset it.
aissecur Posted September 11, 2014 Posted September 11, 2014 It would benefit from a full service if you have not had it looked at for at least 4 years...
7db Posted January 13, 2015 Posted January 13, 2015 Hi - I have an almost identical issue. Does the full service need to be done by ADT and sign-up to a maintenance contract with them, or are there other good independents who can service this kit? How do I find one (West London).
al-yeti Posted January 13, 2015 Posted January 13, 2015 What model is it where in west London? No need to sign up yet
7db Posted January 14, 2015 Posted January 14, 2015 Not sure how I tell what model it is -- I think tis the Galaxy 2. Was installed about 5 years ago. It's in Earls Court, SW5.
james.wilson Posted January 14, 2015 Posted January 14, 2015 There will be a sticker on the panel. If its a 2 it could be a 2-12, 2-20 or 2-44 securitywarehouse Security Supplies from Security Warehouse Trade Members please contact us for your TSI vetted trade discount.
al-yeti Posted January 14, 2015 Posted January 14, 2015 Not sure how I tell what model it is -- I think tis the Galaxy 2. Was installed about 5 years ago. It's in Earls Court, SW5. Your not far from me give me call if you like, also can't pm you yet think you need a few more posts
7db Posted January 15, 2015 Posted January 15, 2015 Thank-you James -- I will take a look and see what it says.
Recommended Posts
Archived
This topic is now archived and is closed to further replies.