search Posted October 4, 2014 Share Posted October 4, 2014 Hiyal folks I would be extremely greatful if someone can advise. I have 7 of the ptz camera's, they are part of the KD6 series of cameras. 6 of them have switches to set the protocol (4 switches) and then there is 3 dials to set the camera number in 100's, 10's and 1's. 1 camera has the 4 switches for protocol, it has an additional 4 for baud rate and the 3 dials. This last camera I have set up on my dvr with the settings below and it works a treat. Channel 14 Protocol: Pelco D Address 3 Baudrate 2400 Data Bits 8 Stop bits 1 Parity None The other 6 cameras I am tearing my hair out. I think the problem is that I dont seem able to set the baud rate as they dont have the option. I can find manuals but these seem to be for the KD6i model I have which is working. So I am stuck. Does anyone know if they came with preset protocols and baud rates. My Dvr can handle the following protocols PANASONIC PELCO-9750 PELCOASC11 PELCOD PELCOD-S PELCOD-S1 PELCOD1 PELCOP PELCOP-STD PELCOP1 PHILLIPS SAMSUNG SANLE SANTACHI SHARP SONY YAAN if anyone out there can help me, I will make a donation by paypal if it works, i dont do this for a living, I just want to set these cameras up at my property. many thanks Quote Link to comment Share on other sites More sharing options...
PeterJames Posted October 4, 2014 Share Posted October 4, 2014 Hi and welcome I may be wrong but i seem to remember the Ultrak were bought out by Honeywell. I also seem to remember that they used their own protocol, which would explain why there are no baud rate settings . I think I have a joystick for one in the office Quote Link to comment Share on other sites More sharing options...
search Posted October 5, 2014 Author Share Posted October 5, 2014 Hi and welcome I may be wrong but i seem to remember the Ultrak were bought out by Honeywell. I also seem to remember that they used their own protocol, which would explain why there are no baud rate settings . I think I have a joystick for one in the office pete - will keep on looking and if it is the case then i think ive lost the battle for now Quote Link to comment Share on other sites More sharing options...
PeterJames Posted October 5, 2014 Share Posted October 5, 2014 If I have the joystick you are welcome to it for the P&P Quote Link to comment Share on other sites More sharing options...
norman Posted October 5, 2014 Share Posted October 5, 2014 I bet you do, you old tiger you Quote Nothing is foolproof to a sufficiently talented fool. Link to comment Share on other sites More sharing options...
PeterJames Posted October 5, 2014 Share Posted October 5, 2014 I bet you do, you old tiger you Read in the voice of Rab C Nesbit Quote Link to comment Share on other sites More sharing options...
search Posted October 8, 2014 Author Share Posted October 8, 2014 If I have the joystick you are welcome to it for the P&P Have sent you a pm, many thanks mate Quote Link to comment Share on other sites More sharing options...
search Posted October 30, 2014 Author Share Posted October 30, 2014 Read in the voice of Rab C Nesbit Hi Peter, ive sent youa pm mate thanks Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.