mirving Posted January 8, 2015 Share Posted January 8, 2015 I am in Northants and need to replace the Terminal Block Fuse Holder and Fuse on a Guardtec 800 Control Box. The unit will also need a battery replaced and a full check over. Current battery is a Power-Sonic Model PS-1270 12 Volt 7.0 Amp. Hr. Lead Acid job. Any local approved repairer interested in sorting this one for me please? Quote Link to comment Share on other sites More sharing options...
RichL Posted January 8, 2015 Share Posted January 8, 2015 Welcome to the site, there are bound to members here who cover your area, who can inspect and test your system. Out of interest, how did the fuse holder get damaged? Quote Originally said by Charles Babbage On two occasions I have been asked [by members of Parliament], 'Pray, Mr. Babbage, if you put into the machine wrong figures, will the right answers come out?' I am not able rightly to apprehend the kind of confusion of ideas that could provoke such a question. Link to comment Share on other sites More sharing options...
mirving Posted January 8, 2015 Author Share Posted January 8, 2015 Fuse holder is not damaged - someone simply lost the piece of black plastic that held the fuse when a fuse went - that and the right fuse (not sure what that is), plus a new battery and the system should be up and running again; but it would seem sensible to have it tested and OK'd. Quote Link to comment Share on other sites More sharing options...
datadiffusion Posted January 8, 2015 Share Posted January 8, 2015 Fair explanation! Quote So, I've decided to take my work back underground.... to stop it falling into the wrong hands Link to comment Share on other sites More sharing options...
mirving Posted January 8, 2015 Author Share Posted January 8, 2015 A picture of the inside of the Control Box and the terminal block (with missing fuse holder and fuse) is attached. Hope this helps. Michael I Quote Link to comment Share on other sites More sharing options...
sixwheeledbeast Posted January 8, 2015 Share Posted January 8, 2015 I suppose the question is why did the fuse blow in the first place. Here's some links to get you started. http://www.thesecurityinstaller.co.uk/community/forum/240-northamptonshire-security-installers/ http://www.nsi.org.uk/directory/ http://ssaib.org/security-provider-search/ Quote Link to comment Share on other sites More sharing options...
datadiffusion Posted January 8, 2015 Share Posted January 8, 2015 Bear in mind the first link may be VERY out of date, I can only speak for the Avon area but half of them were closed and have been removed, I suspect it will be the same for other areas if they haven't been checked by members that know the area. Quote So, I've decided to take my work back underground.... to stop it falling into the wrong hands Link to comment Share on other sites More sharing options...
james.wilson Posted January 9, 2015 Share Posted January 9, 2015 Dd do you think we should have a purge of those areas? Quote securitywarehouse Security Supplies from Security Warehouse Trade Members please contact us for your TSI vetted trade discount. Link to comment Share on other sites More sharing options...
datadiffusion Posted January 9, 2015 Share Posted January 9, 2015 Yup. For a start why should someone not logged in for 5 years have an ad? Quote So, I've decided to take my work back underground.... to stop it falling into the wrong hands Link to comment Share on other sites More sharing options...
norman Posted January 9, 2015 Share Posted January 9, 2015 Get on it DD, be ruthless. Quote Nothing is foolproof to a sufficiently talented fool. Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.