tinnitus Posted February 1, 2015 Posted February 1, 2015 Hi Guys, I used to be an active member here years ago but having a kid stole all my spare time. Anyway, I have a few Flex questions, a few you have probably been asked before. I want the flex 20, I need it to be wireless (zones, not bell or keypad) and I need it to work with the App. I have had a look at the paperwork on the honeywell site but I'm not 100% sure. I may have an old radio portal and some wireless detectors in the loft, maybe from a G3 install, will they work? Maybe that's confusing it a little. Thanks in advance guys. Steve. I stopped fitting intruder a couple of years ago and moved to door access, that's why I don't have a clue about the flex, doh.
datadiffusion Posted February 1, 2015 Posted February 1, 2015 Sorry. can't help, but welcome back! So, I've decided to take my work back underground.... to stop it falling into the wrong hands
GalaxyGuy Posted February 1, 2015 Posted February 1, 2015 You need the c079 based portal and the IB Ethernet module for Flex V3 firmware.
Recommended Posts
Archived
This topic is now archived and is closed to further replies.