stelmo Posted February 11, 2015 Share Posted February 11, 2015 Hi Folks Ive purchased a small Gent Nano panel for replacing a dated system in my old house and im having difficulty getting into engineer mode. Can I reset this thing to default settings somehow? Im beginning to think its somewhat a waste of money if I need a Gent installer to commission it for me danny Link to comment https://www.thesecurityinstaller.co.uk/community/topic/38087-gent-nano-engineer-access/ Share on other sites More sharing options...
datadiffusion Posted February 11, 2015 Share Posted February 11, 2015 Not sure about defaulting but its an all-keypad programmable system AFAIK. Must be a large house? Not worth paying someone? So, I've decided to take my work back underground.... to stop it falling into the wrong hands Link to comment https://www.thesecurityinstaller.co.uk/community/topic/38087-gent-nano-engineer-access/#findComment-410460 Share on other sites More sharing options...
stelmo Posted February 11, 2015 Author Share Posted February 11, 2015 I have the customer code as 0000, so im assuming the engineer access is also the default, but I have no idea what that is, Gent seem to keep everything but the customer manual under lock and key I live in the far north of Scotland, long way from any authorised installer Its only a 16 zone system, quite small unit Link to comment https://www.thesecurityinstaller.co.uk/community/topic/38087-gent-nano-engineer-access/#findComment-410462 Share on other sites More sharing options...
stelmo Posted February 12, 2015 Author Share Posted February 12, 2015 Ive managed to default the panel and guess the code Link to comment https://www.thesecurityinstaller.co.uk/community/topic/38087-gent-nano-engineer-access/#findComment-410473 Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.