datadiffusion Posted February 24, 2015 Posted February 24, 2015 C is not strictly 'no connection'. It is actually a 'normally open' circuit off the relay that for some reason isn't marked as such. Or at least it always was when I last checked years ago. Hence this could cause problems if being used as a resistor common etc... Quote So, I've decided to take my work back underground.... to stop it falling into the wrong hands
sixwheeledbeast Posted February 24, 2015 Posted February 24, 2015 (edited) C is not strictly 'no connection'. It is actually a 'normally open' circuit off the relay that for some reason isn't marked as such. Or at least it always was when I last checked years ago. Hence this could cause problems if being used as a resistor common etc... I don't believe this is the case any more. I have used this for EOL wiring. Thanks that seems straight forward enough. The chap from the electrical wholesalers seem to rate them and apparently a good seller. Had a look online too and appear to get good feedback. I suppose as long it does its job what more can you ask from smoke detector ! Well, intruder alarms aren't exactly designed to be fire alarms. It's normally best to fit mains interlinked in this situation. Don't get me wrong they work well but it's not the best method for quite a few reasons. Hence comments above... Edited February 24, 2015 by sixwheeledbeast fix broken quote box Quote
datadiffusion Posted February 24, 2015 Posted February 24, 2015 I don't believe this is the case any more. I have used this for EOL wiring. You could well be right - last time I actually put my meter on it was about 2004 I think! Quote So, I've decided to take my work back underground.... to stop it falling into the wrong hands
Simlec Posted February 24, 2015 Posted February 24, 2015 Can someone put me back to trade only as my eyes are bleeding. lol Quote
kwano888 Posted February 24, 2015 Author Posted February 24, 2015 lol Newbies gotta learn from somewhere... give us a break guys Quote
Simlec Posted February 24, 2015 Posted February 24, 2015 Newbies gotta learn from somewhere... give us a break guys Could not agree more, but how to wire the device to your chosen panel are in the manuals for both products 1 Quote
kwano888 Posted February 25, 2015 Author Posted February 25, 2015 Could not agree more, but how to wire the device to your chosen panel are in the manuals for both products I know but sometimes manuals are still not great and getting your head round it all can be confusing ! Quote
norman Posted February 25, 2015 Posted February 25, 2015 Nothing wrong with asking. Quote Nothing is foolproof to a sufficiently talented fool.
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.