PGB8000 Posted March 3, 2015 Posted March 3, 2015 Hi I need advice on installing a second keypad to an existing wired alarm system. We’ve had an extension build, and the front door has moved. I want a second keypad near the new front door. My system is a Scantronic 9651, with an existing 9930 keypad. I have 2 questions: 1) I am planning to buy a 9941 keypad (as 9930 is obsolete) – will this work on the same circuit as the 9930? 2) How do I wire it in? Do I just connect the second (new) keypad up to exactly the same inputs on the 9651 board as the existing keypad? Or is it more complex than that? Thanks Phil Quote
datadiffusion Posted March 3, 2015 Posted March 3, 2015 Yes and Yes. Make sure new keypad is set to address 2. Don't have any power on whilst doing it. If you haven't changed the battery in the system box for 4 years, do it at the same time. Remember electricity can kill. Quote So, I've decided to take my work back underground.... to stop it falling into the wrong hands
9651 Posted March 3, 2015 Posted March 3, 2015 (edited) and also have you a new contact/detection on said new entry door? Edited March 3, 2015 by 9651 Quote
PGB8000 Posted March 5, 2015 Author Posted March 5, 2015 Many thanks for the advice. Very helpful. The battery was changed last year - I've had experience of a 7 year old battery failing (previous house/alarm system). So I change it every few years now. And yes, new front door is covered - I moved the sensor from what had become an enclosed room. Quote
datadiffusion Posted March 5, 2015 Posted March 5, 2015 Good stuff, let us know how it went. Quote So, I've decided to take my work back underground.... to stop it falling into the wrong hands
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.