Texecom Veritas R8 Plus Wont Set

[CASSSS]

i removed 3 pirs to redecorate and after the alarms went off i put in the code. i also changed the bell box as the bell was muffled. when i went to set the system zones 2-7 lights come on and it beeps 8 times. it wont let me set. i also notice 3 of the pirs does show the red led when i walk past them. i have 8 zones 1 of which is a panic. please help urgent

 

 

[datadiffusion]

Hi, welcome to TSI.

 

The best way to get urgent help is to call a local professional - whereabouts in the UK are you?

[CASSSS]

I was just after some advice on here on how to do it if anyone could help me

[morph]

You may have faults on zones 2 to 7 so that would be the best place to look for a problem.

[Hillbilly]

I would check the panel fuses first.

[CASSSS]

Yes but if it's fuses then the lights wouldn't work on some pirs and not others

[Adi]

All depends where they took the power from?

[CASSSS]

All power are wire twisted to +v

[CASSSS]

How do I reset to factory settings I only have user code

[al-yeti]

We can't give that info out

But it seems when you disconnected your sensors you havnt connected them back correctly

As said "above" you have problems with zones 2-7 possibly

If you didn't mess with wiring in control panel that should be ok

But zone 1 is a door contact yes? So won't help you to wire the pirs

Each pir will have a negative and positive sometimes it's red and black sometimes it isn't , but if your saying in the panel all of them are connected to +'ve then you need to check what you did in your pits again

Why don't you load some pictures of each pir here ?