Rubble1952 Posted July 19, 2015 Posted July 19, 2015 Could somebody clarify what signals need to be sent to arc for the various systems. Obviously pa, if fitted, intruder, open close, power fail, zone exclude and confirmed. From what I can see the only difference between 2 and 3 is that on 2 tamper can be signalled as intruder where as 3 it has to go as tamper and then fault. Can someone provide clarification. Quote
james.wilson Posted July 19, 2015 Posted July 19, 2015 if you use extended format and send everything you dont need to worry, send sia 3 and send the lot Quote securitywarehouse Security Supplies from Security Warehouse Trade Members please contact us for your TSI vetted trade discount.
timmo66 Posted July 19, 2015 Posted July 19, 2015 We are still on pins. Think I need some sia in my life. Quote
james.wilson Posted July 19, 2015 Posted July 19, 2015 send the log, no issue on what should be sent and gives you all the data from the arc app Quote securitywarehouse Security Supplies from Security Warehouse Trade Members please contact us for your TSI vetted trade discount.
9651 Posted July 20, 2015 Posted July 20, 2015 Galaxy are brilliant on SIA 3, not so sold on texe though it could be our ARC, but it doesn't come though as "logical" as a Galaxy imo, and sisnt seem to send as much information, even though SIA 2 and the T was enabled. I'm going to set one up on the bench for a proper play Quote
Jamie Wilson Posted October 1, 2015 Posted October 1, 2015 I believe for grade 2 systems you still need to signal fault seperately. This can replae power fail if need be. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.