Bruce pearce Posted August 20, 2015 Posted August 20, 2015 Hi All I have managed to get my texecom elite alarm all configured with 6 zones of pir and 2 door contacts . My question is I have installed a com 2400 and I cant get it to do any thing . I have wired it into the phone line and the texecom tells me that it is there .I have inserted my mobile number but it just wont text me . Any ideas as to what I am doing wrong .Or will this unit not text me ? Any help will be appreciated as I have run out of ideas Many Thanks Bruce Quote
BLWTechServices Posted August 20, 2015 Posted August 20, 2015 Hi Bruce, Are you using Wintex to program the panel? If so, in the Communications Options make sure the Enable Communicator box is ticked on the Options Tab. On the ARC's tab, Enter your mobile number in the Primary Telephone number box and select SMS Messaging in the Protocol drop down options. On the same tab, select which areas you want text's to be received for and select the events you want to receive text's for in the Reporting Options. On the Radio Pad and Com Port options tab, enter the phone number of your Mobile providers's SMS service centre in SMS Call Centre 1 or use the Open Tap service, who's number is 07045607101. The cost of using Open Tap is 50p a txt but it tends to be much more reliable than the mobile operator's own service centres. Still on the same tab, make sure Com2400 Module is selected for the Onboard Digi Com option. Hope that helps a bit! Brian Quote
sixwheeledbeast Posted August 20, 2015 Posted August 20, 2015 TAP messaging isn't to be relied upon for signalling. Quote
MrHappy Posted August 20, 2015 Posted August 20, 2015 TAP messaging isn't to be relied upon for signalling. bit like using a carrier pigeon- 1 Quote Mr Veritas God
al-yeti Posted August 20, 2015 Posted August 20, 2015 TAP messaging isn't to be relied upon for signalling. For diy it does a job, not sure if I would have it to show all events though as the call cost will be big! Quote
james.wilson Posted August 20, 2015 Posted August 20, 2015 For diy it does a job sometimes, not sure if I would have it to show all events though as the call cost will be big! I wouldnt use tap for anything Quote securitywarehouse Security Supplies from Security Warehouse Trade Members please contact us for your TSI vetted trade discount.
goncall Posted August 20, 2015 Posted August 20, 2015 I wouldnt use tap for anything it was the ******** when it was free and worked a few years ago,every alarm eng in the land had it at home Quote
james.wilson Posted August 20, 2015 Posted August 20, 2015 it was the ******** when it was free and worked a few years ago,every alarm eng in the land had it at home i also did but i wouldnt now, but then lots of things were ok back in the day that we wouldnt dream of doing now plus it was more reliable then Quote securitywarehouse Security Supplies from Security Warehouse Trade Members please contact us for your TSI vetted trade discount.
Bruce pearce Posted August 21, 2015 Author Posted August 21, 2015 so if tap and general sms is not the best way what is ? Thanks Bruce Quote
BLWTechServices Posted August 21, 2015 Posted August 21, 2015 For a Premier Elite, rather than using the com2400, I'd recommend using either the Com-IP or Com-WiFi module and configure it to send push messages to a smart phone from Texecom's own server. With the app installed on a phone, you also get remote control / virtual keypad capabilty as well as alarm / event notifications, all at no cost. Brian Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.