matt6697 Posted August 24, 2015 Posted August 24, 2015 Wanting to install some door contacts on a galaxy 2 Honeywell system any1 got an suggestions on any good ones needs to be 1k resistance either side im thinking elmdene ones but thery're 400Ohms over would this cause any problems? Quote
james.wilson Posted August 24, 2015 Posted August 24, 2015 pick the right ones Elmdene on gal is green code Quote securitywarehouse Security Supplies from Security Warehouse Trade Members please contact us for your TSI vetted trade discount.
whistle Posted August 24, 2015 Posted August 24, 2015 We use knights contacts, no problems at all. Quote
Nova-Security Posted August 24, 2015 Posted August 24, 2015 CQR to many problems with Knights Quote www.nova-security.co.uk www.nsiapproved.co.uk No PMs please unless i know you or you are using this board with your proper name.
whistle Posted August 24, 2015 Posted August 24, 2015 Ha ha. We always used CQR for a couple of years until we started to get loads of callouts with them going Hi Res. Moved to knights and had very few problems apart from the magnet dropping out of its glue inside the contact. It seems like there isn't enough glue to hold it in so we now add a dab of silicone, job done. Quote
Amps Posted August 25, 2015 Posted August 25, 2015 Moved to knights and had very few problems apart from the magnet dropping out of its glue inside the contact. It seems like there isn't enough glue to hold it in so we now add a dab of silicone, job done. We've had the same problem in the past but not recently. You think Knights have resolved the problem or are you still having problems? Quote
Nova-Security Posted August 25, 2015 Posted August 25, 2015 We always used CQR for a couple of years until we started to get loads of callouts with them going Hi Res. we had that with Knights moved to CQR Quote www.nova-security.co.uk www.nsiapproved.co.uk No PMs please unless i know you or you are using this board with your proper name.
charlie6 Posted August 25, 2015 Posted August 25, 2015 Why not take a look at the suppliers sites, they usually contain the info you need, Security Warehouse has excellent info and back up (not that the others haven't..don't want to get into trouble !!) You could also try a standard contact and use the resistors supplied with the panel, unless there is some sort of regulation that forbids this of course. I like the 'bit of silicon' idea. Quote
datadiffusion Posted August 25, 2015 Posted August 25, 2015 I tried the Ventcroft Premium Door Contact on a few jobs 2 years ago, they look nice on domestics, easier to fit than the Elmdene I was using at the time - feck me, back to nearly every single one, reed welded closed, Knight every time now. Quote So, I've decided to take my work back underground.... to stop it falling into the wrong hands
charlie6 Posted August 25, 2015 Posted August 25, 2015 The manufacturers rely on professionals like yourself Datafussion to sell their products, without you..no sale..Isn't it time that these problems were put back in their court. I reckon a bit, or a lot, of complaining is overdue. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.