ElecTech Posted January 5, 2016 Posted January 5, 2016 How if at all do you get away with installing an optex IR beam within a premises linked onto a grade 3 intruder alarm? I'm hoping to install the SL-350QDM as an added extra across a series of long roller shutters. It already has two contacts either side on all shutters but the customer has asked for additional protection due to the chance of cutting through. I presume it doesn't comply as I've seen nothing in the data sheet to suggest otherwise. I have read something similar that it can be done but cant trigger a confirmed activation? Any help will do! http://www.optex-europe.com/products/optex/185-sl-350qdm/ Quote
james.wilson Posted January 5, 2016 Posted January 5, 2016 it needs to have a backtamper on the beam. Quote securitywarehouse Security Supplies from Security Warehouse Trade Members please contact us for your TSI vetted trade discount.
9651 Posted January 5, 2016 Posted January 5, 2016 (edited) thought there wasn't such a thing? Ie g3 active beam (could be wrong) What about elephant catchers down the Roller shutters? We would normally contact the doors like you have, then have a DT across each one. Edited January 5, 2016 by 9651 Quote
ElecTech Posted January 5, 2016 Author Posted January 5, 2016 I dont believe there is one... I kind of pre guessed before posting but needed confirmation (whey)... Yeah I think I may have a look down that route, surprising nothing is out there though, suppose the demand isn't there... Quote
BUSTER Posted January 5, 2016 Posted January 5, 2016 The Optex beams are grade 3 Quote Any comments / opinions posted are my opinion only and do not represent those of my employer or Company
Nova-Security Posted January 5, 2016 Posted January 5, 2016 The Optex beams are grade 3 it needs to have a backtamper on the beam. Quote www.nova-security.co.uk www.nsiapproved.co.uk No PMs please unless i know you or you are using this board with your proper name.
BUSTER Posted January 5, 2016 Posted January 5, 2016 Where in the regs is that stated Quote Any comments / opinions posted are my opinion only and do not represent those of my employer or Company
whistle Posted January 5, 2016 Posted January 5, 2016 At least you can't disable the anti mask on them Quote
james.wilson Posted January 6, 2016 Posted January 6, 2016 Where in the regs is that statedwhich bit? needs a back tamper for g3 At least you can't disable the anti mask on them yes am on a beam is there Quote securitywarehouse Security Supplies from Security Warehouse Trade Members please contact us for your TSI vetted trade discount.
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.