broda02 Posted January 19, 2016 Posted January 19, 2016 Hello all, I have an accenta g4 system up and running. However when I try and wire a second keypad to the panel (have checked the wiring about a million times!) at power up the keypads just show a version information and accept no button pushes? Alarm also going off. Any ideas? Manual says I can have multiple, so a bit lost !! Thanks in advance for any ideas... Quote
norman Posted January 19, 2016 Posted January 19, 2016 Hello, not familiar with the panel but I'd assume they are addressed, have you set the addresses correctly? Quote Nothing is foolproof to a sufficiently talented fool.
broda02 Posted January 19, 2016 Author Posted January 19, 2016 No addresses. You wire the tamper in series on all the panels and the rest parallel connections (sound, + - Comm) Quote
norman Posted January 19, 2016 Posted January 19, 2016 Have you swapped keypads to prove it's not a faulty one? Quote Nothing is foolproof to a sufficiently talented fool.
broda02 Posted January 19, 2016 Author Posted January 19, 2016 Yes, I haved. Tried both as the single keypad and bot work. Tried a fob one also and same failure.. Thanks for the response Quote
al-yeti Posted January 19, 2016 Posted January 19, 2016 Is it the LCD version keypads ? I beleieve the LCD will work on some of those panels but display info and have certain funstions only and if you have a panel that needs the led keypad you must have one of those to see what your doing , at least it's what I saw on one system Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.