Mf1999 Posted February 16, 2016 Posted February 16, 2016 Hi What are your opinions on the scantronic 9600 and what do you know about it such as when it was released and software bugs Quote
PeterJames Posted February 16, 2016 Posted February 16, 2016 They were okay in their time but technology has moved on a few miles and it must be 20 years since they stopped making them Quote
Hillbilly Posted February 16, 2016 Posted February 16, 2016 Solid panels but would replace now with up to date kit. Quote
Gabs Posted February 16, 2016 Posted February 16, 2016 They are good panels, but due a replacement now Quote
Mf1999 Posted February 16, 2016 Author Posted February 16, 2016 They are good panels, but due a replacement now Ok well as you know I do like it Quote
abbz Posted February 16, 2016 Posted February 16, 2016 I still have some software update chips as had a bug when they wouldn't see cct 1 if programmed as final exit Quote
al-yeti Posted February 16, 2016 Posted February 16, 2016 9651 outdated aswell waste of time , not saying its bad but your better off with Texecom and its firmware Quote
MrHappy Posted February 16, 2016 Posted February 16, 2016 a 9600 is old ****, from IIRC 1989 ish onwards? should some one move in a zone omitted in part set during entry it can produce an alarm, sometimes entry tones can continue after unsetting (walk testing stops it) get crash happy with age Quote Mr Veritas God
datadiffusion Posted February 16, 2016 Posted February 16, 2016 I keep some real old scanny tat, but I wouldn't keep that! Quote So, I've decided to take my work back underground.... to stop it falling into the wrong hands
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.