Hello Everyone I Am New On Here

[Hitmanphil]

Hi I have recently purchased the visonic wireless alarm system (complete) with the expander module as I want the external sounder to be hard wired.

I have the deltabell plus sounder and the wiring diagram is pretty easy to follow,but I'm struggling a little as to what terminals the wires go in the controll panel ?

So far I think I have figured out that

12v +,- goes to siren/ext in the panel

TT. goes to Z29/GND in the panel

What I'm struggling with is where does the strobe and bell of the sounder go into the controll panel?.

I don't know yet if you can post photo's on here of the actual connections for a better idea of what I'm on about.

I hope someone can try and help out a little

Many thanks.

[james.wilson]

Yes you can upload images just use the full reply option not the quick one

[Hitmanphil]

I hope this works and thanks James

[james.wilson]

EXT- = bell trig

12v = Hold Off +

GND = Hold Off -

Z29 = Tamper return but may need a relay

IN- = Strobe -

For some reaon I cant load up your bellbox images

[al-yeti]

As image says you have to programme the strobe output

[Hitmanphil]

[Stevie Duncan]

Expander. Bell

12v. 12v

Gnd 5th in -

Ext - Bell

Int - Strobe

Z29. T either sided

Gnd beside z29. T side not used

Hope this helps

[Hitmanphil]

Brilliant thanks for the information guys

[Hitmanphil]

As you can see it says I have to have a 4.4k resistance so do I link one resister between Z29 & GND at the panel,then the other resister between 12v- and tamper ? The spare T in the bell box

[Hitmanphil]

Hi guy's managed to get the sounder working ok so thanks for the information
My problem now is that I can't access the user settings menu ? In the manuals the master code is #REMOVED# and user code is #REMOVED# when I try and enter these in its not working.
Another code in the manuals is #REMOVED# but this doesn't work either ? Any ideas what's wrong

Thanks
Phil

Edited March 29, 2016 by sixwheeledbeast
no codes please.