CASSSS Posted February 27, 2016 Posted February 27, 2016 how do I wire from a conventional fire alarm panel to intruder panel so if fire alarm goes off it sets bells off on intruder and activates speech dialler? thanks Quote
Lwillis Posted February 27, 2016 Posted February 27, 2016 Use a relay on the fire panel to trip an zone input on the castle - program the zone as fire and stup outputs Quote
PeterJames Posted February 27, 2016 Posted February 27, 2016 If the Fire alarm has to be BS5839 part 1 then the connection between the two systems must be wired in fire tough cable, though the dialler will not be compliant Quote
GTT Posted February 27, 2016 Posted February 27, 2016 One possible consideration is programming the zone the fire alarm is connected to as [12] 'Switcher' then put the dialler onto a programmable output as [35] zone follow... that way you'll get the dialler to activate without sounding the intruder alarm with is a pita having to silence two systems Quote
Joe Doherty Posted February 27, 2016 Posted February 27, 2016 Assuming you got a spare input on your dialler just wire it directly into that through the relay, just double check your trigger polarity is the correct way round, seen it a lot where it only signals upon reset Quote
alarmcom Posted February 28, 2016 Posted February 28, 2016 If the Fire alarm has to be BS5839 part 1 then the connection between the two systems must be wired in fire tough cable, though the dialler will not be compliantnot just the cable. Connecting fire to intruder has more break in regs than you have fingers. Quote
Simlec Posted February 28, 2016 Posted February 28, 2016 not just the cable. Connecting fire to intruder has more break in regs than you have fingers. In what way? Quote
Amps Posted February 28, 2016 Posted February 28, 2016 In what way? Less than 24 hour battery standby Mains supply not in fire rated cable Signalling equipment not in EN54 rated housing That's just for starters. Quote
Simlec Posted February 28, 2016 Posted February 28, 2016 Less than 24 hour battery standby Mains supply not in fire rated cable Signalling equipment not in EN54 rated housing That's just for starters. Why would he want any of that? The fire panel and equipment are just that. The way I read the op question is he/she just wants the existing intruder equipment to ring someone when the fire alarm panel has been activated. The fire panel should have its own bells. Cassss, we could do with some more info! Quote
james.wilson Posted February 28, 2016 Posted February 28, 2016 If you have provided a 5839 cert then wiring it non 5839 kit would make the cert invalid. Quote securitywarehouse Security Supplies from Security Warehouse Trade Members please contact us for your TSI vetted trade discount.
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.